TOC | INDEX |
Step 4: Installing the Ink Cartridge
•With the cover open, press the Power/Ink Button to move the Ink Cartridge Carrier to the load position.
•Open the cartridge cover by pressing down on the tab.
•Remove the ink cartridge from its packaging.
•Slowly remove the tape covering the cartridge's print head.
DO NOT TOUCH THE COPPER AREA!
•Insert the ink cartridge into the carrier,
copper end first and snap the cartridge cover in place.
•Close the Publisher's front cover.
Step 5: Aligning the Cartridge
If you are using a PC the Installer will prompt you to align the cartridge.
If you are using a Mac you will be prompted to align the cartridge before you print for the first time.
Note: An alignment print is required every time you install a new cartridge. The software will always prompt you to align the cartridges. Make sure there is an unprinted disc in the bin for this alignment.
Hardware and Software Setup 13