Primera Technology SE user manual Inner Diameter

Page 43

TOC

INDEX

Photo mode is best used for photographic images where accurate color reproduction is very essential. Images printed in this mode will look lighter than those printed in Photo mode. Skin tones especially will look more natural in this mode.

NOTE: Exact color matching of the printed discs to the screen may never be possible since there are factors that affect this out of the drivers control. The surface of the disc reacts with the ink in the cartridge to produce the color. For this reason, when printing the same image to different brands of discs with different printable surfaces the printed output can look entirely different .

•Intensity

The Intensity setting will control the amount of ink saturation on the disc. When printing onto the Primera ToughCoat discs, 96% is usually sufficient. When printing on to other brands of media, or if you would like to print darker colors, you may wish to increase the Intensity setting.

•Inner Diameter

The inner diameter refers to the size of the non-printed center on your disc. The size of the center hub can vary from one type of media to the next. This allows you to set the inner diameter in millimeters allowing you to print all the way to the center hub regardless of the type of disc you are using. For the discs that Primera sells, use the following guide for Inner Diameter:

−23 mm for Primera's Tuff-Coat CDR

−24.9 mm for the Hockey Rink Disc, Business Card Disc and 80mm CD

•Outer Margin

The Outer Margin refers to where the printing will cut off around the outer edge of your disc. The size of the printable surface can vary from one type of media to the next. This allows you to set the outer margin in millimeters allowing you to print all the way to the edge regardless of the type of disc you are using.

•Save As Default

The Save As Default button will save the current settings as the system-wide defaults.

Creating Discs on a Mac 39

Page 42 Page 44
Image 43
Page 42 Page 44
Contents For Macintosh and PC Printing History Table of Contents Interactive Feature Thank YOU… Getting StartedChoosing a Good Location Unpacking and Inspection Front Panel and Top Identifying the PartsRear Panel PC System Requirements Overview of Operation TOC Index Installing the MAC Software Hardware and Software SetupSetup Installing the PC SoftwareApplying Power Hardware SetupLoading Media Discs TOC Index Select Install the software automatically and click Next Connecting the USB 2.0 CableTOC Index Aligning the Cartridge Installing the Ink CartridgeTutorial Copy a CD or DVD Creating Discs on a PCTOC Index TOC Index TOC Index TOC Index Current Projects Panel Using PtpublisherOpen Project Panel New Project PanelStatus Bar Robot Status PanelProject Detail Window Creating a Print Label Using Surething Advanced Printer Driver Functions TOC Index Disc Surface Quality Paper SizeNon-printable Outer Margin Print QualityInner Diameter Non-Printed Diameter Ink SaturationCalibration Options Inner DiameterBack Center The Print ImageClean/Purge Clean/Change Cartridge & Check Ink LevelsChange Cartridge Using Other Graphics Programs Enable Bi-di PrintingDetails Creating Discs on a Mac TOC Index TOC Index Starting a Project Using DiscribeSaving Projects Utilities and other MenusQueue Projects Robot Write Window Printed Label Format Requirements Advanced Printer Driver Functions Color Matching Inner Diameter Restore Defaults Alignment Calibration Print Clean CartridgeImage Alignment Calibrate Last Disc Interpreting the PUBLISHER’S Indicator Lights Maintenace TroubleshootingCleaning the Publisher Performing a Robotic SELF-TEST Cleaning the INK CartridgeTechnical Support Printing Resolution Technical SpecificationsInner Diameter Index
Top Page Image Contents