TOC | INDEX |
NOTE: Exact color matching of the printed discs to the screen may never be possible since there are factors that affect this out of the drivers control. The surface of the disc reacts with the ink in the cartridge to produce the color. For this reason, when printing the same image to different types of discs with different surfaces the printed output can look entirely different.
Ink Saturation
This option controls the ink saturation of the printed image. When printing onto the printer manufacturer's TuffCoat CD media, this option can be left at its default setting of 100%.
When printing onto other brands of printable CD media, you may need to adjust this control in order to optimize the ink saturation for the printable surface of your specific CD media. If discs do not seem to be drying completely it may be necessary to reduce this value.
Calibration Options
Click on the plus to reveal the following four Calibration options.
Inner Diameter
This value changes the size of the
Inner Diameter Non-Printed Diameter
230 0.905" (22.0mm) (TuffCoatTM, Default)
150 0.591" (15mm) (Physical Center)
Cartridge Alignment
The Cartridge Alignment prints a test print and then automatically scans the print to configure your printer for bidirectional printing and to align the color cartridge. It is important to perform this calibration every time you change a cartridge. If you forget to perform this calibration you will be prompted to do so before your first print from the new cartridge.
Creating Discs on a PC 25