TOC | INDEX |
•Insert the ink cartridges into the carrier, copper end first and snap the cartridge cover in place. Insert the color in the left holder, monochrome black in the right cartridge holder.
Color Black
2
1
1. Push in
2.Lift Up
•Close and lock the unit’s front cover.
Note: The unit will not function unless the front cover is closed and locked! Both LED lights inside the cover will be lit when the cover is locked and closed.
Finally, you must tell the XRn which cartridge was installed by selecting it using the LCD Control Panel. Choose new color, new black, new color and black or used cartridge. Choose used cartridge if you have installed the same cartridges. Choosing used cartridge will retain the current ink level values. Choosing new cartridge will reset the appropriate ink level(s) to 100%.
Step 3: Loading Media (Discs)
NOTE: Your Printer can print directly onto virtually any brand of printable- surface CD/DVD media. However, different brands of discs have different printable coatings. Because of this, you may need to adjust the printer driver settings to accommodate your specific brand of CD/DVD media. Refer to Section 4 for further printer driver information.
For maximum print quality, use CD/DVD media authorized by Primera.
Refer to the following steps when loading discs in to the unit:
• Using the key provided, open the front cover of the unit.
Hardware and Software Setup 7