Primera Technology Network Disc Duplication & Printing System user manual Cleaning the XRN

Page 46

TOC

INDEX

B. CLEANING THE XRN

Use a clean, lint-free rag with a small amount of ammonia window cleaner to clean the XRn's outside case and trays. This type of cleaner is very effective on inks that may accumulate on the printer tray. Stronger cleaning solutions are NOT recommended because they may damage the paint and plastic materials from which the parts are manufactured.

Always disconnect the XRn’s power cords before cleaning. Resume operation only after the surfaces are completely dry.

C. PERFORMING A ROBOTIC SELF-TEST

To ensure that everything is working properly, a Self-Testfeature is built in to your unit. In this mode, the Robotic Disc Transporter will go through the motions of picking and placing a disc to ensure proper working order. Perform the test by doing the following steps:

•Load some discs into the Right Bin

•The cover must be closed for this operation to complete. However, in order to access the buttons you must open the cover. To get around this problem simulate closing the cover by activating the cover lock sensor. You may do this by putting an object such as a folded piece of paper in the slot where the lock would normally be located.

•With the unit turned on, press the Cartridge Button

•While holding the Cartridge Button, press the

Power Button until the robotics start to move.

•Release both buttons

•To stop the test, wait until the disc has moved to the Right Bin and press the Power Button.

42Maintenance and Troubleshooting

Page 45 Page 47
Image 46
Page 45 Page 47
Contents USER’S Manual Printing History Table of Contents Interactive Feature Thank YOU… Getting StartedChoosing a Good Location Unpacking and Inspection Identifying the Parts This illustration shows the XRn and its componentsRear Panel TOC Index Hardware Setup Hardware and Software SetupSetup Applying PowerLoading Media Discs Connect the Ethernet Cable Installing the Administrator Utility Optional Install the Ptpublisher Client SoftwareConfiguring Your Network Click XRnGuest Sending Jobs to the XRn Tutorial Copy a CD or DVDTOC Index 4B. Create a Label TOC Index TOC Index New Project Panel Using PtpublisherOpen Project Panel Current Projects PanelRobot Status Panel Status BarCreating a Print Label Using Surething Project Detail WindowTOC Index Archiving Jobs on the XRN Using Other Graphics ProgramsCreating an Archived Job TOC Index Accessing an Archived Job From the client softwareSoftware Disc Marketing Disc Music CD Promotional DVD From the LCD Control PanelAdministrator Utility Administrator Utility and Advanced FunctionsInfo Users Notifications MediaTOC Index Logging Update XRnSwitch XRn Archived JobsAccessing Printer Driver Settings Advanced Printer Driver SettingsRemote Desktop Instructions Paper Size ResolutionCartridge Type Ink Saturation Color MatchingInner Diameter Centering Test Print BackEnable Ink Low Warning Ink Levels and Cartridge MaintenanceClogged Head Disc Output Location Enable Bi-di PrintingAlignment Calibration LCD Control Panel Operation Idle Status ScreenArchived Jobs Install Cartridges Tools Shutdown / Re-start Main MenuTools Install CartridgesShutdown/Re-start Cancel All Jobs Software Disc Marketing Disc Important notes Input Empty Maintenance TroubleshootingInk Low Cleaning the XRN Performing a Robotic SELF-TESTCleaning the INK Cartridges Source LocationTechnical Specifications GB Sata12, 13 IndexArchived Job 20, 22, 28 Bin selection 26, 27 Print Quality 12, 15
Top Page Image Contents