Primera Technology Network Disc Duplication & Printing System user manual Disc Output Location

TOC INDEX

Disc Output Location

Do not change this setting! It should be left in the Kiosk mode setting.

Enable Bi-di Printing

When enabled the Bravo will print bi-directional for faster printing. The default is uni-directional printing. When you enable bi-directional printing, you should perform the Alignment Calibration described later in this section. Please note that the calibration is stored on your computer, so if you move to a new computer you must repeat the calibration.

Alignment Calibration

The Alignment Calibration allows you you create a test print that will provide you with values to configure your printer for Bi-Di- Printing and to align the color and black cartridges for Color+Black printing. If Bi-Di Printing is enabled, or if you use Color+Black as a cartridge type in the driver settings, it is important to perform this calibration every time you change a cartridge. To print, click the Alignment Calibration Properties button then click Yes.. The print will look like this:

	0	4	8	12
A	1	5	9	13
	2	6	10	14
	3	7	11	15

B

0 2 4 6 8 10 12 14

C

0 2 4 6 8 10 12 14

0 2 4 6 8 10 12 14

D

Administrator Utility and Advanced Functions 35