Philips WACS7500, WAS7500 manual 4.2Remote control, 4.2.1Remote control battery installation

4.2Remote control

The set is supplied with a 2-way remote control and a 1-way remote control.You can use these to

control functions on or .

Note

Use the 1-way remote control for Station management, Network configuration, and to Edit track information.The 2-way remote control cannot be used for these tasks.

Important!

•Always point the remote control directly towards the IR sensor on or you wish to operate.

•First, select the source you wish to control by pressing one of the source select keys on the remote control (for example CD/MP3-CD, HD, FM TUNER,AUX).

•Then select the desired function (for example 2/; / J( / )K).

4.2.1Remote control battery installation

Caution!

To avoid the risk of explosion:

•Do not puncture, cut, or manipulate batteries in any way and do not throw them into the fire.

•Do not short-circuit the battery terminals.

To avoid burn injuries:

• Wear protective gloves when you handle leaking batteries.

To avoid leakage of corrosive battery fluid and damage to the product:

•Always replace all batteries at the same time

•Do not mix old and new batteries or batteries of different types.

•Replace batteries immediately if they are exhausted.

•Always remove the batteries, if the remote control will not be used for a longer period of time.

To avoid batteries being accidentally swallowed:

•Always keep them out of reach of children and pets. (Consult a physician immediately, if a battery has been swallowed!)

ENGLISH

Prepare 25