Philips WAS7500 If you already know the WEP/WPA, key for the Wi-Finetwork, 7Select Automatic

6	If you already know the WEP/WPA	Use the 1-way remote control	Press OK to
	key for the Wi-Fi network:	to enter the WEP or WPA key.	confirm.
	If there is no WEP/WPA key for the	Press OK to skip.
	Wi-Fi network:

7Select Automatic.

8As prompted, select YES to apply the settings.

is connected to the Wi-Fi home network.
will be disconnected from the Wi-Fi network of	.

11.3Connect to wired home network

The wired home network can be a single PC, a PC network, another or .

and can both access the wired and wireless home network at the same time. Using the

supplied Ethernet cable, you can connect or a separately to a wired network while

maintaining its Wi-Fi connection (e.g. the Wi-Fi connection between and on or more , or the Wi-Fi connection with a home network). In this way, you can opt to play the music library of

the wired network only on or a single (UPnP playback).

At the same time, you can still enjoy all the music playback features on the Wi-Fi network.

11.3.1 Set network on Center ( )

1Check that the network device is switched on.

2Connect supplied Ethernet cable to Ethernet ports on network device and .

3Press MENU to enter the menu screen.

4Use 3 or 4 and 2 to enter Settings followed by Network, then Wired.

5Press 2 to continue.

70 Network settings