Introduction

The FIMI Medical Grade MML1801 Medical is a monochrome active matrix, liquid crystal display exclusively designed for medical imaging applications.

The monitor can be used for X-ray and PACS and other medical systems requiring a very high level of image quality for examination and control purpose and can accept an analogue signal input as well as a digital input.

The product is engineered to meet all stringent medical safety requirements, including UL2601.1, CAN/CSA C22.2 No.601.1, EN-60601.1 and the product can be safely placed next to other sensitive equipment with no risk of harmful interference.

Certiﬁcations of monitor also cover requirements for liquid ingress and current-leakage from power supply.

The typical application is to display high resolution X-ray images.

This product delivers much higher brightness than the standard Flat Panel monitors, equal at least to the brightness level of current high-end monochrome CRT monitors used for the same applications.

The other key features of the MML1801 are:

-long term luminance stability through backlight stabilization circuit

-luminace stability vs the viewing angle

-contrast stability vs the viewing angle

-brightness uniformity

-automatic brightness control with backlight sensor and ambient light sensor

-internal automatic greyscale calibration (10 bit L.U.T.)

The tilt swivel base can be removed and the monitor uses a mounting plate that conforms to the VESA mounting standard, that allows ﬂexible mounting options, including wall mounting and rolling stands.

MML1801