Philips MML1801 user manual Video Source, OSD Transparency, OSD Timeout

6.5.5OSD Transparency

1) Press Enter button when the OSD Transparency is highlighted on OSD Settings. The OSD Transparency bar appears.

OSD Settings

OSD Position

OSD Size

OSD Transparency

OSD Timeout

Exit

2)Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image

3)When the position is adjusted, press the Enter button to return to OSD Settings window

4)Select Exit and press again Enter button to return to OSD Main Menu.

6.5.6OSD Timeout

1)Press Enter button when the OSD Timeout is highlight on OSD Settings.

The OSD Timeout bar appears.

OSD Timeout

10 Sec.

20Sec.

30Sec.

45Sec.

60Sec.

90Sec.

120Sec. Disabled

2)Press Enter button and Adjust + or Adjust - button to choose the time of activation of the OSD-Menu.

3)Press the Enter button to confirm your selection and return to OSD Settings window

6.6.0Video Source

The ON SCREEN DISPLAY shows the four sources available. The default is BNC (*) (Composite Video with Sync. On Green). but you can select:

-DVI (Digital Video Input)

-DSUB (D-sub input Video with separated syncr.).

-DSUB-SOG(D-sub input Video with Syncr. On Green)

1)Press Enter button when the Video Source is highlighted on Main menu. The Video Source window appears.

2)Press the Adjust + or Adjust - button until the desired source is highlighted.

3)Press the Enter button to confirm your selection and exit from OSD Main Menu.

Video Source

BNC

DVI

DSUB (Ht. and Vt. Sync.)

DSUB-SOG (Green Input)

DSUB (Ht. + Vt. Sync.)

Exit

(*) see next page

25 MML1801