Philips MML1801 Auto-Clock Feature, Disabled Never Auto-Phase/Position, Auto-Clock/Position

Auto-Setup On Modest

Enabled

Disabled

Only Once

Enabled	Every time the video timing changes
Disabled	Never
Only Once	Only the first time that the video timing is recognized.

6.3.13Auto-Clock Feature

1)Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options. The Auto-Clock Feature window appears.

2)Press Adjust + or Adjust - button until the desired item is highlighted

3)Press the Enter button to confirm your selection and return to Auto-Setup Options window

Auto-Clock Feature

Enabled

Disabled

Enabled Every time the video timing changes

Disabled Never

6.3.14Auto-(Phase/Position)

1)Press Enter button when the Auto-(Phase/Position)is highlighted on Advanced. To perform an automatic adjustmant of the video image.

Valid only BNC, DSUB-SOGand DSUB video source.

2)Select Exit and press again Enter button to return to Image Adjust or select Auto-(Clock/Position).

6.3.15Auto-(Clock/Position)

1)Press Enter button when the Auto-(Clock/Position)is highlighted on Advanced.

To perform an automatic adjustmant of the video image.

Valid only BNC, DSUB-SOGand DSUB video source.

2)Select Exit and press again Enter button to return to Image Adjust or select Auto-Level

6.3.16Auto-Level

1)Press Enter button when the Auto-Levelis highlighted on Advanced.

To perform an automatic calibration of the video signal.

Valid only BNC, DSUB-SOGand DSUB video source.

2) Select Exit and press again Enter button to return to Image Adjust.

MML1801 22