Philips MML1801 user manual Copyright, FCC Notice, Modification, Cables

Page 2

Copyright ©

This manual is copyrighted with all rights reserved. Under the copy rights law, this manual may not be copied, in whole or part, without written consent of Philips. Under the law, copying includes translating into another language or format.

The monitor described in this manual, has been certified/registered by the safety agencies/regulatory authori- ties as model n° :

FCC Notice

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This monitor complies with the European community radio interference standard EN 55011 Class B.

Modification

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the manufacturer may vold the user’s autority to operate the equipment.

Cables

Connections to this device must be made with shielded signals cables with metallic RFI/EMI connector hoods to maintain compliace with FCC Rules and Regulations.

The lighting flash with arrowhead simbol is intend to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electrical shock to people.

The exclamation mark is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in literature accompanying the appliance.

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK.

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

WARNING:

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK AZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR EXCESSIVE MOISTURE.

.

THE ENCLOSURE HAS TO BE CHECKED UPON COLLISION DAMAGE; REFER TO QUALIFIED SERVICE PERSONNEL

MML1801

2

Image 2
Contents User’s Manual Modification CopyrightFCC Notice CablesIntroduction Contents Technical Information Dimensions 205 Installation PositioninigARM Vesa Plate Mounting InstructionPedestal Standard Optional Connecting Instruction Connecting AC PowerConnecting Analog Video Sxga Connecting Composite Video BNCConnecting Digital Video DVI Connecting Touchscreen OptionalRS232 / Touchscreen Connector RJ11-4 Input InstructionControl Panel Description Brightness AdjustBrightness Adjust + Menu select + OSD on Screen Display Menu StructureMain manu Adjust MenuAdjust + Menu + Function Key Description EnterHorizontal Position Image AdjustInformation Image Enhancement Vertical PositionScale / Center Scale / Center Full Screen Maintain Aspect RatioAdvanced ABC SelectionTransfer Function LinearPhase Adjust Clock AdjustAuto-Setup On Modest ServiceAuto-Setup Options Auto-Clock/Position Auto-Clock FeatureDisabled Never Auto-Phase/Position Auto-LevelLanguages OSD SettingsRestore Factory Preset OSD PositionOSD Size OSD Horizontal PositionOSD Vertical Position OSD Size Normal DoubleOSD Transparency OSD TimeoutVideo Source Keyboard Option Keyboard Option Keyboard Unlock Keyboard LockIntentionally Left Blank Fimi S.r.L R&D .CG0209 R2002B 3119 206