Philips 46PFL3708, 50PFL3708, 24PFL4508 Switching audio mode, Sleep timer, To select channels

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control between TV (DTV or Analog TV) and external devices when they are connected to the unit.

1 Turn On a set-top box or the connected device.

• The picture from your set-top box or the connected device might appear automatically on the TV screen.

If the picture does not appear

Press SOURCE repeatedly to select the set-top box or the connected device and wait a few seconds till the picture appears.

e.g.)

19 English

Switching audio mode

1

2

Digital TV operation

Press SAP to display the currently selected language and the number of available languages.

Press SAP repeatedly to cycle through the available audio languages.

11.1

English 1/3

			11.1	HDMI1	HDMI2
	TV	Source
			DTV / Analog TV
	HDMI1		channel
	HDMI2
	HDMI3
	Video
	PC
				Video
			PC	or	HDMI3
				Component
2		• Pressing ▲ reverses the direction of the Input modes.
		Use the remote control of the set-top box or the connected device

to select channels.

Sleep timer

Sleep Timer can set the unit to go into Standby mode after an incremental period of time.

Press SLEEP repeatedly to change the amount of

Sleep 120min.

time (increases the time by 30 minutes up to 120 minutes).

Press SLEEP once to call up the display for checking the remaining time.

•To cancel sleep timer, press SLEEP repeatedly until Off is displayed.

Note

•Available languages differ depending on the broadcast.

•Other is displayed when the audio language cannot be acquired or the acquired languages are other than English, French or Spanish.

	Analog/Cable TV operation
1	Press SAP to display the currently selected audio mode.
2	While receiving an MTS broadcast, press repeatedly			11
	to cycle through the available audio channels.			SAP / STEREO
e.g.) When all audio are available
	SAP/STEREO	SAP/MONO	SAP/STEREO

STEREO : Outputs stereo-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio