Philips 40PFL1708, 50PFL3708, 46PFL3708 Positioning the TV, Regulatory notices, Environmental care

Page 6

2 Important

Positioning the TV

Large screen TVs are heavy. 2 people are required to carry and

handle a large screen TV.

Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

Install the unit in a horizontal and stable position.

Do not install the unit in direct sunlight

or in a place subject to dust or strong vibration.

Depending on the environment, the temperature of this unit may increase slightly.This is not a malfunction.

Avoid a place with drastic temperature changes.

Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

Do not insert the AC power cord into the power socket outlet before all the connections are made.

Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power.

Before you move the TV, disconnect attached cables to prevent damage to connectors.

Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit.

Regulatory notices

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it.

A falling unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this apparatus.

Press to turn the unit on and go into standby mode.

To completely turn Off the unit, you must unplug the AC power cord. Disconnect the AC plug to shut the unit off when trouble is found or not in use.The AC plug shall remain readily available.

AC plug

6 English

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions.Tipping, shaking, or rocking the unit may cause injury / death.

Environmental care

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to recycle the packaging.

For product recycling information, please visit -

www.recycle.philips.com

End of life directives

Philips pays a lot of attention to produce environment-friendly products in green focal areas.Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.

Never use a gas duster on this TV.

The gas trapped inside of this unit may cause ignition and explosion.

Image 6
Contents Register your product and get support at Contents CE.org/safety Wall Mount Bracket Kit Federal Communications Commission Notice Pixel characteristicsWarranty Declaration of ConformityEnvironmental care Positioning the TVRegulatory notices End of life directivesFeatures Supplied accessoriesGet started Stand assembly Attaching the baseManaging cables Installing the remote control batteriesSlide the battery cover off the back of the remote control Slide the cover back into positionRemote control C d e Control panelTerminals B eConnecting the antenna or the cable Plugging in the AC power cordConnecting your devices Selecting your connection qualityDigital Audio Output Connection Component Analog Video ConnectionComposite Analog Video Connection DVD player Audio L/R + Video cablePC connection USB Memory StickInitial setup HomeRetry Settings assistantIf you want to restore the picture setting LocationSwitching channels Switching on your TV and putting it in Standby modeAdjusting volume Use your TVTo select channels Switching audio modeSleep timer Time increases the time by 30 minutes up to 120 minutesFor PC Input signal For 169 video signalFor 43 video signal EasyLink optionsProgram’s image aspect ratio Changing picture format p.20 TV screen informationProgram title Broadcast station To hide the informationUse more of your TV Displaying the Main MenuActive Control Picture Color alignment NormalNoise reduction Black stretchAutoprogram 11.1 Channel listAntenna confirmation Add channelsCaption settings Software upgrade Child and ratings lockLocation Home US TV ratings lock Setting US movie and TV ratingsUS movie ratings lock AllPC settings Canadian English or Canadian French ratingsChange PIN EasyLink Hdmi CEC Device listSetting your location to home StickerLanguage Your USB Picture JpegVideo Motion Jpeg Use to select the Picture or Video, then press OKUpgrade your TV software Checking your current software versionUpgrading the software Useful tips Question AnswerTroubleshooting Unusual picture appears and the TV does not operateMaintenance InformationGlossary Specifications Warranty Shipping charges to return defective product to PhilipsPhilips and Philips Shield are used under license Koninklijke Philips N.V