Setting Up the Device Driver, Automatic Setup

Push the power button and boot the computer.

Setting Up the Device Driver

◆Automatic Setup

1 Insert the setup diskette in the diskette drive and change the directory to A:, where A: is the diskette drive.

To do so, type A: after the C:\ prompt and press [Enter].

2 Type CDSETUP and press [Enter].

3 Reboot the computer.

◆Manual Setup

1 Make the C:\SAMSUNG directory.

2 Copy the files from the diskette to the C:\SAMSUNG directory.

To do so, type COPY A: * . * C:\SAMSUNG after the C:\prompt and press [Enter].

3 Edit the CONFIG.SYS file.

Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry.

LAST DRIVE = Z

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DEVICE = C :\SAMSUNG\SSCDROM.SYS/D : SSCD000/V

4 Edit the AUTOEXEC.BAT file.

Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

C :\SAMSUNG\MSCDEX /D:SSCD000

5 Reboot the computer.

Using the CD-R/RW Drive

To play audio or video CDs in your CD-R/RW drive, proceed as follows.

2 After booting the computer, open the disc compartment by pressing the Eject button.

3 Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button.

The indicator light comes on.

4 Play the disc (CD).

Playing Audio CDs

Run the CD player supplied with Windows or your sound card.

You can listen to the CD by connecting headphones to the appropriate connector. If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel.

If you select digital playback in all versions of Windows Media Player, sounds cannot be output to the headphone jack of the product.

Storing and Cleaning Your Discs

To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs.

1 Do not place a disc in direct sunlight.

2 Store a disc vertically in a well-ventilated and stable location.

3 Do not write or attach a label on a disc.

4 Do not drop a disc or place heavy objects on it.

5 Do not touch the surface of a disc; hold it by the edges.

6 To clean a disc, polish lightly from the inside

of the disc to the outside with a soft cotton cloth.

7 Do not leave the disc compartment open when you are not using it.