Samsung AH68-02265X Checking or Changing Programmed CD Tracks, Listening to a Cassette Tape

Checking or Changing Programmed CD Tracks

You can check or change your selection of tracks at any time.

11	Press the STOP (@) button once if you have started listening to the
	selected tracks.
22	Press the ENTER (	) button.

Result: The following indications are displayed:

	(CH = Check, 01=Program No., -- = Track No.)
	➣➣ If you have already programmed 24 tracks, CH is displayed
33		instead of PROG when you press the ENTER (				) button.
	Press the ENTER (			) button once or more times until the track to be
	changed is displayed.
44	Press the [ or ] button to change a programmed track.
55	Press the ENTER (				) button to confirm your change.
66	Press the PLAY (		) button to start listening to the selected tracks.
	The first track selected is played.

RDS PTY	+10	RDS DISPLAY
	MP3-CD/CD/TAPE
GIGA	TUNING /ALBUM	DSP/EQ
VOL		VOL

Listening to a Cassette Tape

➣➣ Always treat your cassettes with care; refer, if necessary, to the section
			ENG
entitled “Precautions When Using Audio Cassettes” on page 25.
11	Switch the system on by pressing the STANDBY/ON (	) button.
22	Select TAPE by pressing the TAPE button on the main unit.
	You can select TAPE by pressing the FUNCTION button on the remote
	control.
33	Press OPEN/CLOSE (^) of the cassette deck to open the cassette
	door and insert a cassette.
	◆◆ Insert a cassette tape with the recording/playback side facing the
	cassette holder, and then close the cassette deck.
44	Press the + button on the remote control or the p button on the main unit.
	The cassette starts playing.
55	Press the ( or ) button if necessary.

◆◆ Rewind: Press the ( button.

◆◆ Fast-forward: Press the ) button.

66	When you have finished playback, press the STOP (@) button.
	CD
		OPEN/CLOSE
		PARTY
		REC
		SPEED
		REC TO
		USB
		REC TO
		TAPE
	PLAY	REC/PLAY

RDS PTY	+10	RDS DISPLAY
	MP3-CD/CD/TAPE
GIGA	TUNING /ALBUM	DSP/EQ

15