Samsung MX-C850, MX-C830 Repeating One or All Tracks on the Compact Discs, Repeat Playback

Repeating One or All Tracks on the Compact Discs

ENG	You can repeat indefinitely:
	◆◆	A specific track on a compact disc.
	◆◆	All tracks on the compact disc selected.
	◆◆	All discs loaded in the carrousel
	11 Press the REPEAT button.
		Each time you press the REPEAT button, the repeat mode will change
		as follows:
		MP3: REPEAT OFF ; REPEAT TRACK ; REPEAT DIR ; REPEAT ALL ;
		RANDOM
		CD: REPEAT OFF ; REPEAT TRACK; REPEAT DISC ; RANDOM
	22	When you wish to stop the Repeat function, press the Repeat button
		until REPEAT OFF is displayed.
		◆◆ REPEAT OFF: Cancels Repeat Playback.
		◆◆ REPEAT TRACK: Repeatedly plays the selected track.
		◆◆ REPEAT DIR: Repeatedly plays all tracks in the selected folder.
		◆◆ REPEAT ALL: Repeatedly plays all tracks.
		◆◆ REPEAT DISC: Repeatedly plays the entire disc.
		◆◆ RANDOM: Plays tracks in random order.
		ON/OFF		PARTY
		REPEAT	REPEAT
			A-B
		MUTE	RIPPING	TAPE REC

A-B Repeat Playback

You can repeatedly play back a designated section of a CD.

11 Press the REPEAT A-B button at the beginning of desired part. ◆◆ REPEAT A- will be displayed.

22 Press the REPEAT A-B button at the ending of desired part. ◆◆ REPEAT A-B will be displayed.

33 To cancel the REPEAT A-B function, press REPEAT A-B button again. 'REPEAT OFF' will be displayed.

REPEAT	REPEAT	PARTY
	A-B
MUTE	RIPPING	TAPE REC

Function to skip through 10 tracks at a time

Press the +10 button briefly while playing back a CD or an MP3/ WMA-CD. The 10 tracks after the current one will be played back.

Example: If you press the + 10 button during the track 2 playback, you can listen to the track 12 directly.

➣➣ When pressing the +10 button results in a larger track number than the . total tracks, it skips to the first track.

RDS PTY	+10	RDS DISPLAY
	MP3-CD/CD/TAPE

Programming the Order of CD Playback

(This function is not available during playback of an MP3/WMA-CD.)

You can decide:

◆◆ The order of the track desired to listen ◆◆ The track not desired to listen

◆◆ You can program up to 24 tracks.

◆◆ You must stop the compact disc player before selecting the tracks.

11	If the CD function is selected, stop the player by pressing the STOP (@)
	button.
22	Press the ENTER (	) button.
	Result: The following indications are displayed:
	(01 = Program No., -- = Track No.)
33	Select the required track by pressing the [, ] button:

◆◆ Press the [ button to move back through the tracks. ◆◆ Press the ] button to move forward through the tracks.

44	Press the ENTER (		) button to confirm your selection.
	Result: The selection is stored and			is displayed.
55	To select other tracks, repeat Steps 3 to 4.
66	Press the PLAY (	) button to listen to the selected tracks in the order
	programmed.
77	To stop playing, press the STOP (@) button once.
	To cancel the selected tracks, press the the STOP (@) button again.
	➣➣ If you open the Compact Disc Compartment or turn off the
	power, the selection is canceled.

RDS PTY	+10	RDS DISPLAY
	MP3-CD/CD/TAPE
GIGA	TUNING /ALBUM	DSP/EQ
VOL		VOL

14