Samsung AH68-02265X, MX-C830, MX-C870, MX-C850 Setting the Clock, Display function, Led Off

➣➣ What is WMA?

WMA means Windows Media Audio, the global standard for audio signal compression technology.

➣➣ What is MP3?

MP3 means MPEG1 Layer 3, the global standard for audio signal compression technology. It uses digital compression technology to compress original sound data by up to 12 times without sound quality degradation.

➣➣ File Compatibility

◆◆ The unit will playback files created in MP3 format (Mpeg1.Layer3) with *.mp3 as their extension, and some WMA files with .WMA extension can’t be playback.

Setting the Clock

Your system is equipped with a clock which allows you to turn it on and off automatically.

You should set the clock:

◆◆ When you first purchase the mini-compact system ◆◆ After a power failure

◆◆ After unplugging the unit

☛☛For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

ENG

◆◆ Playback of MP2 or 22KHz file is not supported.

➣➣ How many MP3 files can a CD-R or CD-RW disc record? The maximum capacity of one CD-R or CD-RW disc is 680MB. Normally, one MP3 file has a capacity of 4MB, therefore approximately 170 files can be recorded on a single disc.

➣➣ Regarding the playback of CD-R/RW

◆◆ In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (In some cases, due to the disc's characteristics and its recording status, playback may not be available.)

◆◆ The CD-RW is comparably less reflexive than CD which causes more time delay to read.

DISPLAY function

You can view all functions available on the display, adjust the brightness of the display and select the Display/LED either on or off.

Each time you press the DISPLAY button on the remote control or the DEMO & DISPLAY button on the main unit (MX-C830/MX-C850 only), the display mode will change as follows:

◆◆	The Demo function
	All functions available on the system appear on the front panel display.
◆◆	The Dimmer function
	The Dimmer function is selected and the display darkens.
◆◆	LED OFF
	The LED is turned off while the dimmer function is working.
◆◆	Clock ON
	The Clock you set is displayed.
◆◆	LED/Display ON
	All Display and LED are turned on.
	FUNCTION DISPLAY	RIPPING	DISC SKIP
		SPEED

TIMER TIMER/CLOCK SLEEP

ON/OFF

11	Switch the system on by pressing the STANDBY/ON (			) button.
22	Press the TIMER/CLOCK button twice.
	Result: CLOCK is displayed.
33	Press the ENTER (		) button.
	Result: The hour flashes.
44
	To..		Press the TUNING/ALBUM button.
		Increase the hours
		Decrease the hours
55	When the correct hour is displayed, press the ENTER (			) button.
	Result: The minutes flash.
66
	To..		Press the TUNING/ALBUM button.
		Increase the minutes
		Decrease the minutes
77	When the correct time is displayed, press the ENTER (			) button.

Result: The clock will be set.

◆◆ You can see the time, even when you are using another function, by pressing the TIMER/CLOCK once.

◆◆ You can also use the [, ] buttons or the Tuning/Jog Control on the main unit to instead of the TUNING/ALBUM button or in step 4, 6.

TIMER TIMER/CLOCK SLEEP

ON/OFF
REPEAT	REPEAT	PARTY
GIGA	TUNING /ALBUM	DSP/EQ
VOL		VOL

TUNING /ALBUM

MO/ST	TUNING
	11