MTD ERV 350, ERV 365 manual Setting the comfort temperature, ReadingandSettingVentilationLevel

Setting the comfort temperature

Proceed as follows:

1.	Press for two seconds on "				".
2.	Wait until the comfort temperature, e.g." 20.0 ",
	starts to flash.
3.	Select the desired comfort temperature with "
		" or "		".
4	Press "		" briefly now to quit the menu.

2

Position 1 ! Low.

-Use for a low ventilation require ment.

Position 2 ! Normal.

- Use for a normal ventilation re-

quirement.

Position 3 ! High.

-Use this level during cooking, showering and when additional ventilation is desired..

2.3.3 ReadingandSettingVentilationLevel

Via the CC Ease operating unit it is possible:

•To read off and set the ventilation level.

Reading off the ventilation level

The currently set ventilation level, e.g.“2”, is shown as standard on the CC Ease display.The MTD-ERV 350 normally regulates the necessary ventilation level automatically. During automatic ventilation, "AUTO" is shown on the CC Ease display.

As far as the ventilation is concerned, the MTD-ERV 350 adjusts to the highest ventilation level set in the dwelling, un- less otherwise set in the automatic soft- ware control.

The ventilation level can be set as follows:

1.Press " " to increase the ventilation level.

2.Press " " to decrease the ventilation level.

Duringventilationsetbyhand,theindication"MAN- UAL" appears on the CC Ease display.

3. Press " " to quit the menu.

Setting the ventilation level

You can also set the ventilation level by hand and thusincreaseordecreasethelevel.Youhaveachoice of 4 ventilation levels. These are:

•Level A ! Absent.

-Use during absence.

In level A, the dwelling is ventilated with the prescribed minimum air volume.

If level A is set on the CC Ease operating unit, the 3-position switches cannot be used.

Instructions for the User 7