2
2.2.3 Bathroom Switch (Option)
Ventilation with the
A bathroom switch can be used to temporarily set the highest ventilation level of the
350. This switch can be installed in the bathroom, for example, for discharging excess moisture as quickly as possible after showering. As the bath- room switches can have very different designs, no switch is illustrated here.
If desired, the user can also enter an activation and deactivation delay for the bathroom switch via the CC Ease operating unit (see section 2.3.7). This allows the user to specify, for exam- ple, that the
In many cases, however, no separate bathroom switch is installed and the bathroom ventilation control is integrated into the bathroom light switch. The
2.3Use of the CC Ease Operating Unit
ThefollowingfunctionscanbesetusingtheCCEase operating unit:
•Reading off and setting date and time.
•Reading off and setting the comfort tempera- ture.
•Reading off and setting the ventilation levels.
•Switching the extractor hood on and off (op- tion)*.
•Switching the supply and exhaust air fans on and off.
•Setting an individual ventilation programme.
•Setting additional ventilation control func- tions/options in the P menus.
These functions are described in more detail briefly in the following sections.
7.Press " " briefly again.
8.Wait until the minutes, e.g. " 00 ", start to flash.
9.Select with " " or " " the correct min- utes.
10 Press " " briefly again to quit the menu.
2.3.2ReadingandSettingComfortTemperature
Via the CC Ease operating unit it is possible:
ϖϖTo read off and set the comfort temperature.
The comfort temperature is the temperature at which the
(a)Uses the heat exchanger for heat recovery;
(b)Switches on the bypass (hence bypassing the heat exchanger) to (temporarily) interrupt the exchange of heat between the exhaust air and the supply air.
You can read off the comfort temperature, but also set the desired temperature. The
2.3.1 Setting Date and Time
Via the CC Ease operating unit it is possible:
•To set the date and time.
Proceed as follows:
1.Press for two seconds on " ".
2.Wait until the day, e.g. "Sa", starts to flash.
3.Select with " " or " " the correct day.
4.Press " " briefly.
5.Wait until the hours, e.g. " 12 ", start to flash.
6.Select with " " or " " the correct hour.
Reading off the comfort temperature
Proceed as follows:
1.Press " ".
2.Wait until the comfort temperature is displayed.
3.Press " " briefly now to quit the menu.
Without pressing the key, the menu is quit automatically after 30 seconds.
6 Instructions for the User