MTD ERV 365 Menu P9 ! Status of the functions from menu P5, Time delay values, Sub-menu, Default

2

P25

Note:

Only for systems with a remote control switch.

Deactivation delay

for ventilation position 3 (with " ").

•When

" " is pressed BRIEFLY (< 2 sec.), the MTD-ERV 350 switches to the HIGHEST LEVEL for ‘x’ minutes and then switches back automatically to the set level.‘x’ can be set between 1 and 20 minutes.

1 Min.

20 Min. 10 Min.

				Time delay values
Sub-menu	Description			Minimum	Maximum	Default
						setting
P26	Deactivation delay for ventilation position 3 (with "		").	1 Min.	120 Min.	30 Min.
	When
Note:	"	" is held depressed (> 2 sec.), the MTD-ERV 350
	switches to the HIGHEST LEVEL for 'x' minutes and then
Only for sys-
	switches back automatically to the set level.‘x’can be set
tems with a
	between 1 and 120 minutes.
remote con-
trol switch.
P29	Setting the Levels for the Extractor Hood.			1%	99%	10%
(Option)*

When the extractor hood is switched on, the ventilation levels for the extractor hood can be set a few percent higher than the corresponding 'normal' ventilation levels.

Menu P9 ! Status of the functions (from menu P5)

		Ventilation functions
Sub-menu	Description	Activated / not activated
P90	Chimney	Yes (1) / No (0)
	sweep control active?
P91	Bypass open (=yes)	Yes (1) / No (0)
	/ closed (=no)?
P92	Valve of the geothermal heat	Yes (1) / No (0)
(Option)*	exchanger open (=yes)
	/ closed (=no)?
P93	Post-heater active?	Yes (1) / No (0)
(Option)*
P94	0 – 10 V control active?	Yes (1) / No (0)
(Option)*
P95	Frost protection	Yes (1) / No (0)
	(standard or preheater) active?
P96	Extractor	Yes (1) / No (0)
(Option)*	hood control active?
P97	Moisture control active?	Yes (1) / No (0)

12 Instructions for the User