2
–Press " " again.
–Wait until the minutes, e.g. " 00 " start to flash.
–Select with " " or " " the desired time in minutes.
–Press " " again.
–Wait until the ventilation symbol starts to flash.
–Select the desired ventilation level with "
" or " ".
–Press " " to store the switching moment.
5.Program the next ventilation programme, if required.
–Then perform steps 1 to 5 for the next venti lation programme.
2.3.7Setting Additional Functions via the P Menus
Via several P menus of the CC Ease operating unit you can:
•Read off the status of various ventilation functions;
•Activate or deactivate time delays for various ventilation functions;
•Set time delays for various ventilation func- tions.
In the P menus the user may:
-only set the additional functions P1, P2 and P9.
The remaining P menus P3 to P8 are re- served for the installer.
Access to the P menus
Proceed as follows:
1. Press " " and " " simultaneously.
2.Wait until "P menu" appears on the display.
3.Select the desired P menu with " " or " ", e.g. " 2 ".
4.Press " " to confirm the P menu.
5.Select the desired P
or " ", e.g. " 23 ".
6.Press " " to confirm the P
Making settings in the P menus
The minimum and maximum values for the available ventilation functions are stored in the software.
7.Select a new value for the function with " " or " ".
8.Press " " to save the value.
9.Repeat steps 5 to 8 to
set several P
Or
Return to the P menu; press once on " " and possibly start again at step 3.
Or
Return to the main window
Press " " twice.
10 Instructions for the User