Philips user manual Automatic PowerSaving, 196V3L

Page 22

5. Power Management

5. Power Management

5.1 Automatic PowerSaving

If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.The following table shows the power consumption and signaling of this automatic power saving feature:

196V3

	Power Management Definition
VESA	Video	H-sync	V-sync	Power Used	LED color
Mode
Active	ON	Yes	Yes	< 19.3W (typ.)	White

Sleep	OFF	No	No	< 0.5 W (typ.)	White
(Standby)					(blink)
Switch Off	OFF	-	-	< 0.5 W (typ.)	OFF
196V3L

	Power Management Definition
VESA	Video	H-sync	V-sync	Power Used	LED color
Mode
Active	ON	Yes	Yes	< 17.6 W (typ.)	White

Sleep	OFF	No	No	< 0.5 W (typ.)	White
(Standby)					(blink)
Switch Off	OFF	-	-	< 0.5 W (typ.)	OFF

The following setup is used to measure power consumption on this monitor.

Native resolution: 1366 x 768

Contrast: 50%

Brightness: 200 nits (196V3), 250 nits (196V3L)

Color temperature: 6500k with full white pattern

Note

This data is subject to change without notice.

20

Image 22

Contents 196V3 Table of Contents Temperature 0-40C 32-95F Humidity 20-80% RH Safety precautions and maintenanceOperation Notational Descriptions Weee Setting up the monitor Installation Package contentsSetting up the monitor Basic and simple instruction on the control keys Cursor, OK to confirm the choice or changeResolution notification Remove the base How does it work? Why do I need it?Philips SmartControl Lite Image Optimization Color menu Image Optimization On single input displays, this pane will not be visible Image Optimization Task Tray Menu Disabled Task Tray Menu EnabledExit Close SmartControl Lite TFT-LCD Monitor panel typeYES Power On mode 19.3W typ., 20.81Wmax Energy Consumption Mtbf Rohs YES EpeatResolution & Preset Modes 196V3 Automatic PowerSaving196V3L Lead-free Product For more information, please visit2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive Epeat Electronic ProductBenefits of Epeat Product also comply with the following standardsFederal Communications Commission FCC Notice U.S. Only Reorient or relocate the receiving antennaCommission Federale de la Communication FCC DeclarationVaroitus Polish Center for Testing and Certification NoticePaikka/Ilmankierto Plassering/VentilasjonErgonomie Hinweis nur Deutschland Achtung Beim AufstellenTypes of Pixel Defects Philips Flat Panel Monitors Pixel Defect PolicyPixels and Sub pixels Bright Dot DefectsDark subpixel Black Dot DefectsTotal bright dot defects of all types Adjacent dark subpixels0810 Belgium Care Contact Information for Western Europe regionAustria Siemens I&S 078 Denmark NovoFujitsu IBACPS Contact Information for Apmea region AL Shahd Computer L.L.CTroubleshooting No Picture Power LED not litPower on light is too strong and is disturbing Green, red, blue, dark, and white dots appears on the screenSmartControl Lite FAQs Run Windows Update and updated monitor and/or video driverIcm? Q4 How do I adjust the resolution? Color TemperatureThe 2 settings are 6500K, and 9300K Q7 How should I clean the monitor surface?Q9 Can I connect my monitor to any PC, workstation or Mac?