Philips 196V3 user manual Safety precautions and maintenance, Operation

Page 3

1. Important

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor.

It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1 Safety precautions and maintenance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Please keep the monitor out of direct sunlight, very strong bright lights and away from

any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is

missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the monitor panel.When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth.The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.

o Temperature: 0-40°C 32-95°F

o Humidity: 20-80% RH

1

Image 3
Contents 196V3 Table of Contents Safety precautions and maintenance Temperature 0-40C 32-95F Humidity 20-80% RHOperation Notational Descriptions Weee Installation Package contents Setting up the monitorSetting up the monitor Cursor, OK to confirm the choice or change Basic and simple instruction on the control keysResolution notification Remove the base Why do I need it? How does it work?Philips SmartControl Lite Image Optimization Color menu Image Optimization On single input displays, this pane will not be visible Image Optimization Task Tray Menu Enabled Task Tray Menu DisabledExit Close SmartControl Lite Monitor panel type TFT-LCDYES Power On mode 19.3W typ., 20.81Wmax Energy Consumption Rohs YES Epeat MtbfResolution & Preset Modes Automatic PowerSaving 196V3196V3L For more information, please visit Lead-free ProductProduct also comply with the following standards Epeat Electronic ProductBenefits of Epeat 2006/95/EC Low Voltage Directive 2004/108/EC EMC DirectiveReorient or relocate the receiving antenna Federal Communications Commission FCC Notice U.S. OnlyFCC Declaration Commission Federale de la CommunicationPlassering/Ventilasjon Polish Center for Testing and Certification NoticePaikka/Ilmankierto VaroitusAchtung Beim Aufstellen Ergonomie Hinweis nur DeutschlandBright Dot Defects Philips Flat Panel Monitors Pixel Defect PolicyPixels and Sub pixels Types of Pixel DefectsAdjacent dark subpixels Black Dot DefectsTotal bright dot defects of all types Dark subpixel078 Denmark Novo Contact Information for Western Europe regionAustria Siemens I&S 0810 Belgium CareIBA FujitsuCPS AL Shahd Computer L.L.C Contact Information for Apmea regionNo Picture Power LED not lit TroubleshootingGreen, red, blue, dark, and white dots appears on the screen Power on light is too strong and is disturbingRun Windows Update and updated monitor and/or video driver SmartControl Lite FAQsIcm? Q4 How do I adjust the resolution? Q7 How should I clean the monitor surface? Color TemperatureThe 2 settings are 6500K, and 9300KQ9 Can I connect my monitor to any PC, workstation or Mac?