4.2.10Beep On Arbitration Loss BeepOnArbLoss (Default=OFF)
Generate a host computer beep if the adapter returns a "Bus Arbitration Loss" response to the host computer. Bus Arbitration Loss occurs when another I2C Bus master wins arbitration while the adapter is attempting to become a bus master.
4.2.11Beep On Slave Negative Acknowledgment BeepOnNak (Default=OFF)
Generate a host computer beep if the adapter returns a "Slave Not Acknowledging" response to the host computer. Slave Not Acknowledging occurs when the adapter is attempting to become a bus master and no slave device acknowledges the transmitted slave address.
4.2.12 Beep On /INT Assert
BeepOn/INT (on INT supported adapters only. Default=OFF)
Generate a host computer beep if the adapter returns an "/INT Signal Assert" response to the host computer. /INT Signal Assert occurs if /INT Signal Monitoring is enabled and a high to low transition is detected on the adapter /INT signal connector.
4.2.13 Load I2C Message List File
AutoLoad=filename AutoLoad="file name" filename.iml
"file name.iml"
Automatically open file with extension .IML and load messages into Message Center spreadsheet.
26