Philips MIIC-201D/U manual

Select the Adapter	29
Establish Adapter Communications Link	30
Basic Setup	30
Advanced Setup	31
Adapter’s Own I2C Slave Address	31
General Call Enable	31
I2C Bus Master Bit Rate	31
I2C Bus Time-Out	31
Enable INT Signal Monitor	31
Diagnostic Setup	32
Log File Level	32
Log File Name	32
Log File Size	32
Sending I2C Messages	33
Master Operations	33
Specifying the Destination Address	33
Repeated Start Messages	33
Auto Repeat	34
Master Transmitting Data	34
Specifying Master Tx Message Bytes	34
Sending Master Transmit Messages	35
Master Receive Data	35
Specifying Data to Read	35
Negative Acknowledge Last Byte	36
Master Transmit and Receive	36
Slave Operations	36
Slave Transmit Data	36
Slave Receive Data	36

6 Uninstalling Software Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Uninstalling iPort Utility Pack for Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Uninstalling iPort DLL/USB VCP Device Driver . . . . . . . . . . . . . . . . . . . . . . . 37

iPort DLL/USB Revision Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Appendix A - I2C Connector Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40