Firmware A1.51 | Philips 7FF1WD instruction

	Philips Photo Frame	Firmware A1.51
	Update Procedure Document	Firmware A1.51
	Update Procedure Document

	Reason for software update: For 7FF1WD models	Release date: Jul 13, 2006
	Reason for software update: For 7FF1WD models
	Software version A1.51 will provide the following improvements:

-Extend the SD card support from 1GB to 2GB

-Increasing maximum photos support number from 4096 to 10240

Important notice before updating:

The software update process will remove all photos currently stored on Photo Frame. Please make sure all photos on Photo Frame are properly backed up before updating.

What is needed before software update

1. Check your current Photo Frame software version.

> Make sure Photo Frame is ON> Press the 3rd key from the left on the rear of Photo Frame > General settings menu will appear. > Use the key behind the Down arrow to highlight Status. > Current Software version will appear on the right column. > If the software version is earlier than 1.51, this update is applicable to your Photo Frame.

2.Prepare a supported memory card: If your software version is 1.47 or earlier than 1.31, only Secure Digital (SD) type of memory card can be supported during software update. All other versions support Secure Digital (SD), Memory Stick (MS), Compact Flash (CF), or Multimedia Card (MMC) types of memory cards.

3.PC with Internet access or downloaded Photo Frame software on PC

Software update procedure

1.After downloading, Unzip all the software file, and select correct software update ZIP file

	Software version 1.47 or earlier than 1.31	Software version later that 1.31 but not 1.47

7FFEWD	WD_VA1.51_SD.zip	WD_VA1.51_AllTypeCard.zip

2.Unzip all the software update files (6 files in total) onto the root directory of the supported memory card

3.Make sure Photo Frame is OFF and properly connected to DC power.

Important: Please use DC power NOT battery power to avoid a possible power loss that could cause permanent damage to your Photo Frame.

4.Insert the supported memory card into Photo Frame

5.Power on Photo Frame; the software update will start automatically. During the update, DO NOT remove the memory card or make new connections.

Note: It may take up to 1 minute before the updating process begin. The screen will remain black during this period

4.The Software update is complete when you see one of the following messages on Photo Frame: Photos stored on your memory card

Or if you memory card does not contain photos:

No photos on external memory

6.After software update is complete, remove the memory card.

7.Restart Photo Frame

8.Congratulations! You have successfully updated your Photo Frame. You may remove the software update files from the memory card now.

Troubleshooting:

In the event your software update is not successful, please make sure:

1.Your memory card is supported by current software

2.All files are correctly unzipped to the root directory of the supported memory card.

Note: If you have previously updated another Photo Frame with this memory card, some files may have been changed by the update. Solution: Unzip the files again from the PC to the supported memory card.

3. Make sure Photo Frame is properly powered during the entire update process.

7FF1WD specifications

The Philips 7FF1WD is an innovative digital photo frame designed to bring your memories to life in vivid detail. This device stands out for its sleek design, user-friendly features, and an array of advanced technologies that cater to modern users looking to showcase their treasured photographs.

One of the most striking features of the Philips 7FF1WD is its impressive display. With a high-quality resolution that brings photos to life, this frame ensures that images are displayed with vibrant colors and sharp details. The frame's 7-inch screen provides ample space to showcase your favorite photos, making it an attractive addition to any room. Its elegant frame design complements a variety of home decors, ensuring it fits seamlessly into your living space.

Equipped with innovative technologies, the Philips 7FF1WD allows for easy viewing and management of your photo collection. The frame supports multiple image formats, including JPEG and BMP, ensuring compatibility with most digital photo sources. Users can easily upload photos to the frame through USB or SD card inputs, offering flexibility in how images are transferred and displayed.

One of the key advantages of the Philips 7FF1WD is its intuitive interface. The device features a user-friendly navigation system that allows users to easily scroll through their images, adjust settings, and create slideshows. This makes it simple for anyone, regardless of tech-savviness, to enjoy the frame’s features. Additionally, the built-in slideshow function allows users to customize transitions and durations, adding a personal touch to their photo display.

Another standout characteristic of the Philips 7FF1WD is its energy-efficient design. The frame uses low power consumption technology, helping to reduce energy costs and minimize its environmental impact. The frame can also be set to automatically turn off after a specified period, ensuring it doesn’t remain on when not in use.

The Philips 7FF1WD is more than just a digital photo frame; it serves as a versatile tool for sharing and enjoying memories. With its high-quality display, easy-to-use features, and energy-efficient design, the Philips 7FF1WD is an excellent choice for anyone looking to keep their cherished moments alive in a modern and stylish way.