Philips 42PFL6805H manual EasyLink Remote Control, IR sensor, Solar charger

13 Red colour key

To open interactive TV or to select a Text page. 14 Green colour key

To open the Eco settings or to select a Text page. 15 Yellow colour key

To open and close Help or to select a Text page. 16 Blue colour key

To select a Text page.

17 Number keys and text keypad

To select a TV channel directly or to enter text. 18 Subtitle

To switch Subtitles on or off.

19Teletext To open text.

To learn how to use the remote control, read Help > To begin > TV tour > Remote control.

EasyLink Remote Control

The remote control of the TV can also operate a connected device. The device must have EasyLink (HDMI-CEC) and have it switched on. The device must also be connected with an HDMI cable.

Operate an EasyLink device

To operate such a device with the TV remote control, select the device -or its activity- in the h Home menu and press OK. The commands of all keys, except the h key, is forwarded to the device.

If the key you need is not on the TV remote control, you can show extra keys on screen with Show remote control.

Show remote control keys

To show the device keys on screen, press o (Options) and select Show remote control. Select the key you need and press OK.

To hide the remote control keys of the device, press b (Back).

In general, these keys open the following device menus: 1 Home menu

2 Setup menu

3 Disc menu (disc content)

4Pop-up menu

5Options menu

6Programme guide

7Media selection

Read more about EasyLink in Help > Setup > Devices > EasyLink HDMI-CEC.

IR sensor

Always make sure you point the remote control at the remote control infrared sensor on the front of the TV.

Solar charger

The battery of the remote control is rechargeable. You can charge the battery with the solar cells located on the back of the remote control housing.

Use your TV / Remote control 21