Hardware Setup
Chapter 2.
Hardware Setup
Front View
1
2
3
4
1.Reset / Firmware Upgrade Switch
M Pressing and holding this switch in while powering On the
M Pressing and holding this switch in for more that two seconds performs a system reset.
Note: This switch is recessed and must be pushed with a thin object - such as the end of a paper clip, or a ballpoint pen.
2.10/100 Mbps Data LED
M The LED lights GREEN to indicate 10 Mbps data transmission speed.
M The LED lights ORANGE to indicate 100 Mbps data transmission speed.
3.Link LED
Flashes GREEN to indicate that a Client program is accessing the device.
4.Power LED
Lights when the
5