ATEN Technology ACS-1216AL, ACS-1208AL user manual Hotkey Operation

Page 32

Hotkey Operation

Skip Mode This feature allows you to switch between computers in order to monitor them manually. You can dwell on a particular port for as long or as little as you like - as opposed to Auto Scanning, which automatically switches after a fixed interval. To invoke Skip Mode, key in the following Hotkey combination:

1.Invoke Hotkey Mode (see p. 3-1).

2.Key in [Arrow]

M Where [Arrow] refers to one of the Arrow keys. After you press [Arrow], you automatically exit Hotkey Mode, and enter Skip Mode where you can switch ports as follows:

Skips from the current port to the first accessible port previous to it. (See Scan/Skip Mode, p. 4-7, for information regarding accessible ports.)

Skips from the current port to the next accessible port.

Skips from the current port to the last accessible port of the previous Station.

Skips from the current port to the first accessible port of the next Station.

MOnce you are in Skip Mode, you can keep on skipping by pressing the Arrow keys. You don’t have to use the [NumLock] + [-] combination again.

MWhile Skip Mode is in effect, ordinary keyboard and mouse functions are suspended - only Skip Mode compliant keystrokes can be input. You must exit Skip Mode in order to regain normal control of the console.

3.To exit Skip Mode, press [Esc] or [Spacebar].

3-5

2003-01-27

Image 32
Contents ACS-1208AL ACS-1216AL For additional information 2003-01-27 Packing List Table of Contents Firmware Upgrade Utility Appendix A, Technical InformationAppendix B, Module Removal Appendix C, Rack MountingAbout This Manual OverviewKey information Viii 2003-01-27 Introduction Overview2003-01-27 Features Hardware Requirements Function CS Part Number2L-1700 / 2L-1701 2L-5201P / 5202P / 5203P ACS-1208AL / ACS1216AL Front View CoverKeyboard Power LED ACS-1208AL / ACS-1216AL Rear View Cable Tie SlotFirmware Upgrade Port LCD OSD Configuration LCD OSDBefore you Begin InstallationSingle Stage Installation Daisy Chaining Installation ACS-1216AL Switching Station Positions Hot PluggingPort ID Numbering Powering Off and Restarting Port Selection2003-01-27 Hotkey Operation Hotkey Port AccessInvoking Hotkey Mode Selecting the Active Port Press EnterSetting the Scan Interval Invoking Auto Scan Hotkey Operation Control Hotkey SummaryOSD Operation OSD OperationWEB Server OSD Navigation OSD Main Screen HeadingsHeading Explanation SN-PNOSD Functions F1 GotoF2 List Choice MeaningScroll Lock Scroll Lock or Ctrl Ctrl Setting FunctionF3 SET Quick View + Powered on Only those Ports which F4 ADM + / . and Space Accessible SET QuickView Ports PortsReset UpgradeStation IDS FirmwareF5 SKP F6 BRC F7 Scan F8 Lout 2003-01-27 Firmware Upgrade Utility IntroductionBegin Performing the Upgrade Upgrade2003-01-27 Firmware Upgrade Utility Upgrade Failed Firmware Upgrade Recovery 2003-01-27 Technical Information ACS-1208AL / ACS-1216AL Connection TablesACS-1208AL MVsACS-1216AL OSD Factory Default SettingsSetting Default Specifications Function ACS-1208AL ACS-1216ALClear Login Information Symptom Possible Cause Action TroubleshootingLimited Warranty 2003-01-27 Module Removal Removing the KVM ModuleRemoving the Keyboard and Touchpad Module Removal 2003-01-27 Rack Mounting Standard Rack MountingOptional Rack Mounting Rack Mounting 2003-01-27 Index ACS-1216LLCD