ATEN Technology ACS-1216AL, ACS-1208AL user manual Quick View + Powered on Only those Ports which

OSD Operation

(F3 SET: continued)

Setting	Function
PORT ID	Selects how the Port ID is displayed: the Port Number alone
DISPLAY	(PORT NUMBER); the Port Name alone (PORT NAME); or
MODE	the Port Number plus the Port Name (PORT NUMBER +
	PORT NAME). The default is PORT NUMBER + PORT
	NAME).
SCAN	Determines how long the focus dwells on each port as it
DURATION	cycles through the selected ports in Auto Scan Mode (see F7
	SCAN, p. 4-14). Key in a value from 1 - 255 seconds, then
	press [Enter]. Default is 5 seconds; a setting of 0 disables the
	Scan function.
SCAN/SKIP	Selects which computers will be accessed under Skip Mode
MODE	(see F5 SKP, p. 4-12), and Auto Scan Mode (see F7 SCAN,
	p. 4-14). Choices are:
	ALL - All the Ports which have been set Accessible (see SET
	ACCESSIBLE PORTS, p. 4-10);
	QUICK VIEW - Only those Ports which have been set
	Accessible and have been selected as Quick View Ports (see
	SET QUICK VIEW PORTS, p. 4-10);
	POWERED ON - Only those Ports which have been set
	Accessible and are Powered On;
	QUICK VIEW + POWERED ON - Only those Ports which
	have been set Accessible and have been selected as Quick
	View Ports and are Powered On. The default is ALL.
SCREEN	If there is no input from the console for the amount of time set
BLANKER	with this function, the screen is blanked. Key in a value from
	1 - 30 minutes, then press [Enter]. A setting of 0 disables this
	function. The default is 0 (disabled).
HOTKEY	Enables / Disables the Hotkey Command function in case a
COMMAND	conflict with programs running on the computers occurs.
MODE

4-7

2003-01-27