Black Box ServSwitchTM CWDM Mux, ACXCWDM4 manual Appendix A. Rackmount Options

ServSwitch CWDM Mux

Appendix A. Rackmount Options

ServSwitch CWDM Mux units can be mounted in a 19" rack using the mounting kit.

Use the rackmount kit (ACS2209A-RMK) to mount up to four devices of the dual-head devices’ size 4.1"H x 5.6"W x 16.5"D (10.3 x 14.3 x 4.2 cm) into a 19“ server rack. The rackmount kit requires 1U of rack space. Use blank plates to cover unused device positions.

The Rackmount Kit (ACS2209A-RMK) contains the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.com.

•(1) base plate

•(7) M2, 5x2 spacers

•(3) blank plates

•(8) M2, 5x5 Phillips countersunk screws

You can mount up to two ServSwitch CWDM Muxes into a 1U rack space.

Follow these steps to rackmount the units:

1.Align the holes on the base plate with the empty screw holes on the base of the device.

2.Fasten the base of the unit to the plate of the mounting kit.

3.Only use the supplied short screws to prevent damages to the printed circuit boards.

4.Close the remaining gaps with blank plates.

Using the rackmount kit, you can mount one to four devices. In the leftmost position, you can install a rackmountable power sup- ply unit to power up to three devices.

Page 14 724-746-5500 blackbox.com