Black Box manual LP004A , DC-powered, -48VDC Installation

Page 48

BLACK BOX→ Power Over Ethernet Switch(PoE) Installation and User Guide

3.7 LP004A , DC-powered, -48VDC Installation

This section describes the proper connection of the -48VDC leads to the DC power terminal block on the LP004A hardened PoE (as shown in Figure ). The DC terminal block on the LP004A is located on the left side of the unit and is equipped with three (3) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that either of the terminal may be grounded by the user if desired. The chassis is “earth” or ground (GND).

The connection procedure is straightforward. Simply insert the DC leads to the LP004A’s power terminals, positive (+) and negative (-) screws. The use of Ground (GND) optional; it connects to the LP004A chassis. Ensure that each lead is securely tightened from the top, as shown here.

35

Image 48

Contents Power over Ethernet PoE Switch January2006 LP004ATrademarks Phone 724 Contacting Black Box CorporationIii Page Page Page Vii Page Page Specifications Operation Revisions Ports Performance Network StandardsOperating Environment Ambient Temperature ratings Storage TemperatureMaximum Ethernet Segment or Domain Lengths Cold StartPackaging Cooling MethodPower Supply Temperature un-controlled Extreme Ratings -40 to 75CPort Connectors LED Indicators Dual front and topMounting options Agency Approvals and Standards ComplianceAccessories Summary of models and descriptions LP004A SeriesInspecting the Package and the Product Product Description LP004A Series Page Page Page Page Black Box LP004A with four RJ-45 Copper ports Page Black Box LP004A, as shown in is Black Box LP004A-Series, with four RJ-45 Copper ports Frame Buffering and Latency Page Page Two sets of LEDs for viewing status from any angle DC Power input for LP004A PoE Switch Rugged metal case, Industrial gradePage Example 4b. LP004A Power Source Switch for PoE device only VideoPage NCM Locating the PoE Switch Unit Page Page Page DIN-Rail mounting option LP004A is shown alongside DIN-Rail-MC2 bracketPower Requirement for Black Box LP004A Power Source Switch Power Output DC Power Terminals +, -, gnd Power Consumption of the unitLP004A , DC-powered, -48VDC Installation Connecting Ethernet Media GND can be hooked up at the lastMedia Ieee Standard Connector Page Dual-Speed Functionality, and Switching Switching, Filtering and Forwarding Switching, Address Learning Auto-cross MDIX, Auto-negotiation and Speed-sensingPage Troubleshooting Before Calling for Assistance When Calling for Assistance