CHAPTER 4: Operator Controls and Indicators
4.Operator Controls and Indicators
4.1AC Power Switch
The AC power switch is located on the Switch’s rear panel. Move it to the “” position to turn on the SCSI Switch.
NOTE
Always turn on the SCSI Switch before powering SCSI devices and computers. This will ensure that devices are found when the system boots up.
4.2 LCD Display, Keypad, and Indicators
4.2.1LCD DISPLAY
The LCD display shows the selection parameters available.
SET PORTS
>SET TERMINATION DISPLAY PORTS DISPLAY ACTIVITY
DISPLAY POWER, TEMP FRONT PANEL LOCK
>SET SERIAL PORTS SET SWITCH NUMBER
>SET TEMP LIMIT DISPLAY VERSION
Figure 4-1. The LCD display’s main menu.
17