T1 FIBER OPTIC LINE EXTENDER/SIMULATOR
General Safety Precautions
Transport, Installation, and Operation
•Avoid excessive vibration and shocks.
•Avoid contact with water and dust.
•Avoid excessive direct sunlight.
•Ensure sufficient cooling.
•Prevent loose items from falling into the device.
Fiber Optics
•Looking into the fiber optic output can cause injury to the eyes. When observation is necessary, avoid exceeding the limits recommended in ANSI
Mains Power
•Disconnect the power cord before opening the device.
•Use exclusively the included power supply with an approved power cord.
•The power plug must be plugged into a properly grounded receptacle. An improperly wired receptacle could place hazardous voltage on accessible metal parts of the device.
•The mains supply must match the Simulator’s power specification.
•Replace blown fuses with fuses of the exact type and rating.
•Do not work on the equipment during periods of lightning activity.
4