Installation, Operation and Care of
MODEL MGF24 GAS FRYER
PLEASE KEEP THIS MANUAL FOR FUTURE USE
GENERAL
Vulcan fryers are produced with quality workmanship and material. Proper installation, usage and maintenance of your fryer will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions provided.
INSTALLATION
The fryer must be restrained with adequate ties to prevent tipping when installed in order to avoid the splashing of hot liquid.
UNPACKING
This fryer was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check for possible shipping damage. If the fryer is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Carefully unpack fryer and place in a
Before installing,verify that the electrical service and type of gas supply (natural or propane) agree with the specifications on the rating plate located on the inside of the front panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer or
LOCATION
The equipment area must be kept free and clear of combustible substances. This fryer is for use only in locations adjacent to
— 4 —
