Fujitsu FS-1016MT, FS-1004MT, FX1008MT user manual Introduction, Unpacking

Page 3

Introduction

Thank you for buying our KVM Switch (from here on, simply referred to as the "switch device"). This switch device is usable with PC/AT compatibles as well as supporting Sun and multi-platform configurations. Requiring only a single master set of control devices (monitor, keyboard and mouse), this switch device allows you to operate multiple PC/AT compatible and Sun model computers (hereafter referred to as "hosts") from a single console setup. Hosts can be selected simply via the select switches, keyboard or using the on screen display (OSD).

Safety instructions are provided to ensure the safe use of the switch device.

Also, be sure to thoroughly read this User's Manual before you start using the switch device to ensure correct use. Be sure to keep this User's Manual in a safe place for future

reference.

This user’s manual is written for 4-port, 8-port and 16-port setups. Unless specifically noted, all explanations assume an 8-port setup.

Unpacking

Verify that the following items are included in the package. If any items are missing or damaged immediately contact the place of purchase or our service department.

KVM Switch

1 pc.

User’s Manual

1 pc.

AC Cable

1 pc. (For 8 and 16 port product)

AC Adapter

1 pc. (For 4 port product)

19 inch rack mount and holder

1 large and 1 small set (For 8 and 16 port product)

Assembly screws

1 set (For 8 and 16 port product)

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Servis Multi Voluntary control of electromagnetic interference Unpacking IntroductionSafety Instructions Page Features Component Names and Their Functions Keyboard connector Port Rear Panel Power cable connectorConnectors for hosts 1 through Connector for SunFunction Switching the KVM While Using SUN HostsLOW Power Detection Installation Procedure Rack SetupSetup Second level Slave First level Master Host selection by Host Selector Buttons Normal mode Host Selection by Keyboard Hot Key ModeOperation Screen Details Host Switching Switching Via Keyboard To select slave port #2~9 To select slave port #10~12 Host name may be up to 14-characters long Setting/Changing Host NamesHost Switching Hot Key Mode activated via double Ctrl keyPage Page Select SpecificationsOptional Accessories Sold separately Special CablesMisc Symptom Cause Action TroubleshootingAscii keyboard for PC/AT compatible machines Key layout diagramAscii keyboard for Sun Slave Unit Port.1 Slave Unit Port.3 Slave Unit Port.5 Master Unit Slave Unit Port.2 Slave Unit Port.4Slave Unit Port.15 Slave Unit Port.12Slave Unit Port.13 Slave Unit Port.14
Top Page Image Contents