Fujitsu FX1008MT, FS-1016MT, FS-1004MT user manual

Page 5

The monitor cable connector is a DB 15 HD type. You will need a monitor conversion connector (available separately) to attach a Sun monitor that has a different shape connector. Make sure you connect it in the correct orientation and use the fixing screws to hold it in place. It may cause trouble if it is not connected properly.

The [POWER] LED on the front panel flashes if the AC cord comes unplugged, reminding you to reconnect it.

Cascaded connections must be setup exclusively with our KVM switches only. You cannot make these connections with switches produced by other manufacturers.

A maximum of two levels of cascaded connections are allowed (including the master). Attempting to cascade three or more levels will not work.

4

Image 5

Contents Servis Multi Voluntary control of electromagnetic interference Unpacking IntroductionSafety Instructions Page Features Component Names and Their Functions Connectors for hosts 1 through Port Rear Panel Power cable connectorConnector for Sun Keyboard connectorFunction Switching the KVM While Using SUN HostsLOW Power Detection Installation Procedure Rack SetupSetup Second level Slave First level Master Operation Host selection by Host Selector Buttons Normal modeHost Selection by Keyboard Hot Key Mode Screen Details Host Switching Switching Via Keyboard To select slave port #2~9 To select slave port #10~12 Host name may be up to 14-characters long Setting/Changing Host NamesHost Switching Hot Key Mode activated via double Ctrl keyPage Page Select SpecificationsMisc Optional Accessories Sold separatelySpecial Cables Symptom Cause Action TroubleshootingAscii keyboard for PC/AT compatible machines Key layout diagramAscii keyboard for Sun Slave Unit Port.1 Slave Unit Port.3 Slave Unit Port.5 Master Unit Slave Unit Port.2 Slave Unit Port.4Slave Unit Port.13 Slave Unit Port.12Slave Unit Port.14 Slave Unit Port.15