Fujitsu manual Fix the four rack mounting brackets to the XG1200

Page 28

3. Fix the four rack mounting brackets to the XG1200.

Each of the four rack mounting brackets (left, right, back-left, back-right) has three holes that should line up with matching holes on the sides of the XG1200, as shown in the diagram. Attach each rack mounting bracket using the countersunk bracket screws provided.

 

Bracket

Rack Mounting Bracket BL

 

Screws

 

Rack Mounting Bracket L

2

 

Bracket

Bracket

Screw

Screws

 

 

 

Rack Mounting Bracket BR

 

 

Bracket

 

 

Screws

 

 

Bracket

 

 

Screw

 

 

Rack Mounting Bracket R

 

 

Bracket

 

 

Screws

4. Slide the XG1200 into the rack and fasten it in place.

Insert the XG1200 into the rack and line up the back rack mounting brackets with the already attached rails. Do not let go of the XG1200 until the rack screws (large) have been fastened to the previously installed rack/cage nuts. The rack screws (small) may then be used to fas- ten the back rack mounting brackets to the rails.

Securely tighten all the screws with a screwdriver.

Rack Screws (Small)

Rack Screws (Small)

Rack Screws (Large)

Rack Screws (Large)

Installation Procedure

27

Image 28
Contents XG1200 Hardware Guide Preface For Safe Use of the XG1200 For Safe Use of the XG1200Not used properly XG1200 is not used properly Safety precautions No self maintenanceFor security Safety High safetyLaser safety Electromagnetic compatibilityAbout This Manual Targeted reader and expected knowledgeOrganization Related manualsTrademarks and abbreviations used in this manual Symbols used in this manualProduct Information Contents Appendix Before Use 1Parts List CD-ROMParts List 2XG1200 Components XG1200 frontXG1200 rear Indicator LEDs LED3Labels Product nameplate Product ID LabelMAC Label Before Use Installation and Operation 1Installation Overview Installation requirements 2Installation ProcedureSpace requirements Set up requirements Installing the XG1200 in a rack When the rack has round post holes Fix the four rack mounting brackets to the XG1200 Slide the XG1200 into the rack and fasten it in placeThis completes the rack installation procedure Uninstalling the XG1200 from a rackSlide the XG1200 forward, and remove it from the rack 3Cable Connection Connecting the fiber optic cablesConnect the fiber optic cables to the XG1200 Connecting the power cords Connect the power cords to the XG1200Connect the power cord to the power outlet Turn the power switch to the on position by pressing Side Execute the system shutdown command4Basic Operation Turning the XG1200 onTroubleshooting XG1200 does not turn on Alarm LED blinks, but the XG1200 does not start upStatus LED blinks, but the XG1200 does not start up Fan error Temperature errorVoltage error Power supply errorTroubleshooting Appendix Product Specifications Appendix-ASpecificationsInstallation Specifications XG1200 Hardware Guide