This symbol indicates the possibility of minor or moderate personal injury, as CAUTION well as damage to the XG1200 and/or to other users and their property, if the
XG1200 is not used properly.
Category | Caution | |
|
| |
Danger of device | Do not place the XG1200 on its side or stack up multiple XG1200s. Doing so may damage the XG1200. | |
damage |
| |
Do not install the XG1200 in an unstable place (such as on a slanted surface or a place subjected to | ||
| ||
| vibrations). Doing so may damage the XG1200. | |
|
| |
| Do not place any objects or perform any work on the XG1200. Doing so may damage the XG1200. | |
|
| |
| Install the XG1200 inside a building. Using the XG1200 outside may damage it. | |
|
| |
| Do not use the XG1200 in areas of extremely high temperature, low temperature, or a area where the | |
| temperature goes up and down suddenly. Installing the XG1200 in such areas may damage it. | |
|
| |
| Do not expose the XG1200 to seawater. Installing the XG1200 in such areas may damage it. | |
|
| |
| Do not use the XG1200 in a place subjected to shock or vibrations. Using the XG1200 in such a place | |
| may damage it. | |
|
| |
| Do not use the XG1200 in a place where chemicals are being sprayed or may otherwise come in contact | |
| with it. Using the XG1200 in such a place may damage it. | |
|
| |
| Do not use the XG1200 near objects which generate strong magnetic fields, such as microwave ovens. | |
| Using the XG1200 in such place may damage it. | |
|
| |
| Do not use the XG1200 with foreign objects (liquids and/or pieces of metal) inside it. Using the XG1200 | |
| in such a condition may damage it. | |
|
| |
| When moving the XG1200, be sure to remove the power plug from the outlet first. Not doing so may | |
| damage it. | |
|
| |
Danger of | Do not use the XG1200 near a radio or a TV. | |
electromagnetic | Doing so can interfere with the radio and TV reception. | |
interference |
| |
|
| |
Danger of | To avoid an electric shock, do not open the cover unless you are a maintenance engineer. | |
electric shock | When performing maintenance on the XG1200, be sure to remove the power plug from the outlet first. | |
|
| |
Danger when | Only use the XG1200 if the temperature inside the rack is 40°C or less. Ignoring this may damage the | |
rackmounting | XG1200 (page 24). | |
|
| |
| Ensure that the rack is sufficiently ventilated and that excess heat is properly exhausted (page 24). | |
|
| |
| Check that the configuration of devices in the rack does not overload the power supply (page 24). | |
|
| |
| To ensure the stability of the rack, fix it to the wall or floor as appropriate (page 24). | |
|
| |
| Do not install the XG1200 in a rack if it would make it unstable (page 24). | |
|
| |
| Check that all units installed in the rack are correctly connected to a grounded power source (page 24). | |
|
| |
| When removing the XG1200 from a rack, and be sure to hold it by both sides. | |
| At least two people should work together. (page 25) (page 28) | |
|
| |
Danger when | When cleaning the XG1200, only use a soft cloth, and wipe it gently. | |
cleaning |
| |
|
|
4