Fujitsu XG1200 manual Connect the power cord to the power outlet

2. Connect the power cord to the power outlet.

Insert the plug at the other end of the power cord into the power strip or wall socket.

WARNING

• Unplug the XG1200 during thunder-starting. Continued use under these conditions
	risks lightning damage to the XG1200, and may cause a fire.
• When you remove a power plug from its outlet, be sure to pull the only power plug
	itself. Pulling on the power cord itself may expose the cores or break the cord, and
	cause electric shock or fire.
•	Insert the power plug completely into the power socket. Using the XG1200 with a	2
	half inserted power plug may cause a fire or damage.
•	If the XG1200 is to be left unused for any significant period, remove the power plug

from the outlet for safety reasons. Failure to do so may cause a fire or damage.

Attention

•If your XG1200 has two power supply units, both should be connected to a power supply.

•Maximum redundancy is achieved when each power supply unit is connected to a separate, independent power source.

Cable Connection

31