Black Box KV0004A-LED, KV0004A-XTRA-LED See 4.6 Optional Glide and Switch operations and settings

Page 25

Chapter 4: Configuration

3.Double-click on each screen representation to set the screen resolution and, optionally, add a screen name and/or configure an LED indicator (if used). See Figure 4-3.

Figure 4-3. Defining the resolution of a screen and (optionally) a name

The screen resolutions are not critical but they enable the ServSwitch Freedom unit to accurately map the movement of the mouse onto corresponding movements of the pointer across the screens. The screen names, if used, are not downloaded to the ServSwitch Freedom unit.

If you need to configure an LED indicator, click the LED Setup tab. Please see 4.5 Configuring LED indicators for details.

4.When the screen map is complete and accurately matches the true layout of the display screens, click File and choose the Save option to store a copy of the layout. The layout will be stored as a ‘Glide and Switch Config file’ with the extension: .ffc

5.Ensure that the upgrade cable is correctly installed - see Section ‘4.3.1 Installing the Glide and Switch configuration application’.

Click the Configure menu and choose the Connection... option to ensure that the correct computer serial port is selected and that the Baud Rate matches that of the ServSwitch Freedom unit (1200 is the default speed).

6.To send the configuration, click the Send Layout to Switch option.

•If the download is successful, the screen representations will briefly turn gray and the upper four indicators on the

ServSwitch Freedom unit will begin to scroll across (they will continue to do this while Glide and Switch mode is enabled).

•If the download is unsuccessful, a message dialog will explain that it is ‘Unable to communicate with the device’. Check the upgrade cable, check that the correct serial port is selected and check that the connection speed shown within the utility matches the speed used on the ServSwitch Freedom unit.

7.IMPORTANT: Once the Glide and Switch configuration application has downloaded the setup, remove and recon- nect power to the ServSwitch Freedom switch.

See 4.6 Optional Glide and Switch operations and settings

724-746-5500 blackbox.com

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents ServSwitch Freedom Trademarks Used in this Manual ServSwitch FreedomFCC and IC RFI Statements ServSwitch Freedom Table of Contents CE, FCC SpecificationsOverview Introduction OverviewWhat‘s Included FeaturesAdditional Items You May Need R v S w i tc h F re e d o m Hardware Description Top PanelRear Panel Power input or power supply connects hereNumber Component Description ComputerInstallation Locations InstallationMounting User console ConnectionsTo connect peripherals to the user console To connect a computer system Computer systemsTo connect the power supply Power in connectionTo connect a computer or device for remote control Channel switching by external controlOptions port pinout Control by RS-232 serial Serial port parameter settingsSerial port channel selection codes Optional LED indicator connections Port 2 Port LED indicator with Metre lead Configuration Using the Configuration Menu ConfigurationTo use the configuration menu To exit the configuration menu and save changesHotkeys disabled Ctrl + Alt defaultEnter the Switch Mode menu All defaultBlackbox.com To set the default switching mode Switching modeTo set a new password To reset configuration to factory defaultsMiscellaneous functions To show the current firmware version1A 2A Configuring the Glide and Switch systemSee 4.6 Optional Glide and Switch operations and settings Visual C++ Runtime Configuration AppDrivers Configuring multiple monitors Adjusting color and brightness for all indicators Configuring LED indicatorsAdjusting individual indicators To adjust details for an individual indicatorConfiguration Mouse parking... setting Mouse... settingSwitch... settings Using the KVM Firmware Uploader utility Performing upgrades Windows onlyItems required to perform an upgrade Issues to consider when performing flash upgrades Temporarily disabling and enabling Glide and Switch Selecting a computer using the Glide and Switch utilityOperation Operation Selecting a computerTo select a computer using the front panel Selecting a computer using the front panelUsing standard hotkey press combinations Selecting a computer using hotkeysSelects channel Selecting a computer using the mouse buttons Using additional hotkey press combinationsTo select a computer using the mouse buttons To cancel the password Locking access to the computersIf you forget the password To lock the unitEnumerated USB switching Appendix A. What is True Emulation?Emulated USB switching True EmulationAppendices Issues when using Glide and Switch Appendix B. What is Glide and Switch?Serial remote control and flash upgrade cable 10p10c Serial remote control and flash upgrade cable 8p8cAppendix C. Cable pin-outs Appendix D. Safety information About Black Box Black Box Tech Support FREE! Live /7
Related manuals
Manual 16 pages 52.68 Kb

KV0004A-XTRA-LED, KV0004A-LED, ServSwitch Freedom, KV0004A specifications

The Black Box KV0004A and its variants, including KV0004A-XTRA-LED and KV0004A-LED, are advanced KVM (Keyboard, Video, Mouse) switches designed to streamline the management of multiple servers and computers from a single console. These devices are pivotal for IT professionals and data centers, providing efficient control over several systems, thereby optimizing workflow and enhancing productivity.

One of the standout features of the KV0004A series is its ability to support up to four computers, making it ideal for environments with limited space or resources. Users can easily switch between connected systems using a simple button, keyboard hotkey, or an On-Screen Display (OSD) menu, which simplifies the operation and minimizes downtime. The KV0004A series supports resolutions up to 1920 x 1200, ensuring clear and sharp visuals during operation, critical for tasks requiring detailed monitoring.

The KV0004A-XTRA-LED model incorporates an enhanced LED interface that provides real-time status updates for each connected computer. This feature enhances visibility and helps users quickly identify active systems, crucial for fast-paced environments where efficiency is paramount. Additionally, the integrated firmware is designed for easy updates, allowing for improved performance and feature enhancements over time.

In terms of connectivity, the KV0004A series supports a wide range of input and output options. It can easily interface with USB and PS/2 peripherals, ensuring compatibility with a variety of devices. In addition, the switches are designed with robust security features, protecting sensitive data being transmitted from unauthorized access, which is essential for any organization working with confidential information.

Another noteworthy characteristic of the Black Box KV0004A series is its plug-and-play functionality, allowing for quick setup without the need for additional software or drivers. This ease of installation means users can get up and running in no time, reducing the potential for errors during deployment.

Lastly, the ServSwitch Freedom adds another dimension by providing true freedom of movement with wireless capabilities. This allows users to operate systems from a distance, greatly increasing flexibility and comfort for system administration tasks. The combination of advanced features, reliable technologies, and user-centered design makes the Black Box KV0004A series a pinnacle choice for effective KVM switching in both enterprise and small business environments.
Top Page Image Contents