Black Box KV0004A-XTRA-LED, KV0004A-LED manual Configuration App, Visual C++ Runtime, Drivers

Page 26

ServSwitch Freedom

4.4 Multi-Monitor Glide and Switch configuration

(Windows only)

4.4.1 Installing drivers and multi-monitor config app

In order to use Multi-Monitor mode you will need to install a Multi-Monitor Glide and Switch driver (available for download from the Black Box website. Go to the KV0004A product page and click on the 'Resources' tab) onto each PC that has multiple monitors attached.

1.On each multiple monitor PC, run the downloaded file. After accepting the licence agreement you will be prompted to choose a destination folder. Either accept the suggested location or change it, as necessary.

Note: The Install for all users option should be ticked if there are more than one user account on the PC and all need to use Glide and Switch.

2.The options available during installation are as follows:

•Full Install, (this is recommended), or

•Options to install individually:

•Configuration App.

This is the Glide and Switch application and needs to be installed only on the PC that will be used to set up the ServSwitch Freedom switch via the supplied flash upgrade cable and OPTIONS port.

•Visual C++ Runtime

The C++ runtime library is a windows component that is required by the multi-monitor driver in order to run its helper applications. It is pre-installed with Windows but is offered here as an option as you may want to keep an older version already installed on your system, or you may already have a newer version in your copy of Windows.

•Drivers.

Multi-Monitor Glide and Switch drivers that are required on each PC that will be using Multi-Monitor.

Choose the required components and click the Next > button.

3.Once the chosen components have been installed, click the Finish button.

Note: On the PC that will be used to set up the ServSwitch Freedom switch, you can optionally tick ‘Click to run the Glide and Switch Configuration Application’ in the lower left corner to immediately begin using Glide and Switch - see 4.5 Configuring multiple monitors opposite for details.

Note: On each PC that you installed the driver, a process called mumoapp.exe will remain running.

Page 26

724-746-5500 blackbox.com

Page 25 Page 27
Image 26
Page 25 Page 27
Contents ServSwitch Freedom ServSwitch Freedom Trademarks Used in this ManualFCC and IC RFI Statements ServSwitch Freedom Table of Contents Specifications CE, FCCOverview Overview IntroductionAdditional Items You May Need FeaturesWhat‘s Included Hardware Description Top Panel R v S w i tc h F re e d o mNumber Component Description Power input or power supply connects hereRear Panel ComputerMounting InstallationInstallation Locations To connect peripherals to the user console ConnectionsUser console Computer systems To connect a computer systemPower in connection To connect the power supplyOptions port pinout Channel switching by external controlTo connect a computer or device for remote control Serial port channel selection codes Serial port parameter settingsControl by RS-232 serial Optional LED indicator connections Port 2 Port LED indicator with Metre lead To use the configuration menu ConfigurationConfiguration Using the Configuration Menu To exit the configuration menu and save changesEnter the Switch Mode menu Ctrl + Alt defaultHotkeys disabled All defaultBlackbox.com Switching mode To set the default switching modeMiscellaneous functions To reset configuration to factory defaultsTo set a new password To show the current firmware versionConfiguring the Glide and Switch system 1A 2ASee 4.6 Optional Glide and Switch operations and settings Drivers Configuration AppVisual C++ Runtime Configuring multiple monitors Adjusting individual indicators Configuring LED indicatorsAdjusting color and brightness for all indicators To adjust details for an individual indicatorConfiguration Switch... settings Mouse... settingMouse parking... setting Items required to perform an upgrade Performing upgrades Windows onlyUsing the KVM Firmware Uploader utility Issues to consider when performing flash upgrades Operation Selecting a computer using the Glide and Switch utilityTemporarily disabling and enabling Glide and Switch Operation Selecting a computerSelecting a computer using the front panel To select a computer using the front panelSelects channel Selecting a computer using hotkeysUsing standard hotkey press combinations To select a computer using the mouse buttons Using additional hotkey press combinationsSelecting a computer using the mouse buttons If you forget the password Locking access to the computersTo cancel the password To lock the unitEmulated USB switching Appendix A. What is True Emulation?Enumerated USB switching True EmulationAppendices Appendix B. What is Glide and Switch? Issues when using Glide and SwitchAppendix C. Cable pin-outs Serial remote control and flash upgrade cable 8p8cSerial remote control and flash upgrade cable 10p10c Appendix D. Safety information Black Box Tech Support FREE! Live /7 About Black Box
Related manuals
Manual 16 pages 52.68 Kb

KV0004A-XTRA-LED, KV0004A-LED, ServSwitch Freedom, KV0004A specifications

The Black Box KV0004A and its variants, including KV0004A-XTRA-LED and KV0004A-LED, are advanced KVM (Keyboard, Video, Mouse) switches designed to streamline the management of multiple servers and computers from a single console. These devices are pivotal for IT professionals and data centers, providing efficient control over several systems, thereby optimizing workflow and enhancing productivity.

One of the standout features of the KV0004A series is its ability to support up to four computers, making it ideal for environments with limited space or resources. Users can easily switch between connected systems using a simple button, keyboard hotkey, or an On-Screen Display (OSD) menu, which simplifies the operation and minimizes downtime. The KV0004A series supports resolutions up to 1920 x 1200, ensuring clear and sharp visuals during operation, critical for tasks requiring detailed monitoring.

The KV0004A-XTRA-LED model incorporates an enhanced LED interface that provides real-time status updates for each connected computer. This feature enhances visibility and helps users quickly identify active systems, crucial for fast-paced environments where efficiency is paramount. Additionally, the integrated firmware is designed for easy updates, allowing for improved performance and feature enhancements over time.

In terms of connectivity, the KV0004A series supports a wide range of input and output options. It can easily interface with USB and PS/2 peripherals, ensuring compatibility with a variety of devices. In addition, the switches are designed with robust security features, protecting sensitive data being transmitted from unauthorized access, which is essential for any organization working with confidential information.

Another noteworthy characteristic of the Black Box KV0004A series is its plug-and-play functionality, allowing for quick setup without the need for additional software or drivers. This ease of installation means users can get up and running in no time, reducing the potential for errors during deployment.

Lastly, the ServSwitch Freedom adds another dimension by providing true freedom of movement with wireless capabilities. This allows users to operate systems from a distance, greatly increasing flexibility and comfort for system administration tasks. The combination of advanced features, reliable technologies, and user-centered design makes the Black Box KV0004A series a pinnacle choice for effective KVM switching in both enterprise and small business environments.
Top Page Image Contents