Checklist of System Components | Black Box ACU3001A, ACU3009A

SERVSWITCH™ BRAND CAT5 KVM MICRO EXTENDER

4.Checklist of System Components

4.1The Complete Package

These items should be included with your ServSwitch™ Brand CAT5 KVM Micro Extender package (please contact Black Box right away if any are missing or damaged):

•(1) Micro Extender Local Unit.

•(1) Micro Extender Remote Unit.

•(1) 9-VDC 1-amp power-supply transformer and output cord.

•(1) Power-supply input cord suitable for your country or region.

•(1) 1-m (3.3-ft.) KVM-extension cable (runs from CPU to Local Unit) with a DB25 male connector at the Unit end and an HD15 male connector and two

6-pin mini-DIN male connectors at the CPU end. (If your system uses 5-pin DIN keyboard connectors, see the start of Section 4.2 for how you’ll connect it.)

•(1) Copy of this manual.

4.2 The Cables You’ll Need

If you are using the ServSwitch™ Brand CAT5 KVM Micro Extender to get greater distance between a CPU and a VGA monitor, PS/2 keyboard, and PS/2 mouse, your Micro Extender package should have included everything you’ll need except for your Unit-interconnection cable. Read Sections 4.2.1, 4.2.3, and 4.2.5 carefully, then skip ahead to Chapter 5.

If you are using the Micro Extender to get greater distance between a ServSwitch family KVM switch and a CPU, a user station (monitor/keyboard/mouse), or a compatible switch, you might need additional non-included cabling. Read the relevant sections on the next few pages, from Section 4.2.1 through Section 4.2.5.

If you are using any equipment with PC/AT style connectors, you might also need some combination of these adapters:

•To attach a CPU or KVM switch with a 5-pin DIN female keyboard connector to the Local Unit: A keyboard-port adapter such as product code FA211.

•To attach a CPU or KVM switch with an RS-232 serial DB9 male mouse connector to the Local Unit: A mouse-port adapter such as product code AC244A. (If the mouse port is DB25 rather than DB9, you’ll also need an FA521A serial adapter.)

•To attach a keyboard or KVM switch with a 5-pin DIN male keyboard connector to the Local or Remote Unit: A keyboard adapter such as product code FA212.