User Controls
On-Screen Display (OSD) Menus
The
Displaying Menus and Selecting Items
1.To open the OSD Menu, press the Menu button on the remote control or on the projector’s control panel.
To close the OSD Menu, press the Freeze/ESC/L button. The menus close if you don’t select from them within 10 seconds.
This example shows the Management menu selected from the OSD Main menu.
OSD Main menu |
| Selected menu (Management | |||
|
|
| menu in this example) | ||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.To select one of the menus on the OSD Main menu, press the
keys.
3.Press the 
key or Enter/R button to get to the selected menu.
4.Press the 
keys to highlight a control on the selected menu, then press the Enter/R button. In the example above, the OSD Location control is highlighted.
5.Press the 
keys to adjust the highlighted control.
6.To accept your new setting, press the Menu button to return to the OSD Main menu.
7.When you’re finished changing settings, press the Menu button or the Freeze/ESC/L button. The OSD menu closes and your new settings are in effect.
NOTE: As you’re adjusting a control, you can return it to its previous setting by pressing the Auto button.
NOTE: The menus in this section show typical settings, but the actual settings you will see depend on the type of video signal.
20 | Xerox DP1015 User’s Guide |