Xerox DP 1015 manual Setting the Screen Resolution, If you have a Windows PC

Page 40

Maintenance

Setting the Screen Resolution

For best viewing on your computer screen, its resolution should be set to 1024 x 768 or less. To reset the screen resolution, follow the steps below, referring to the chart on page 36 for the correct settings for your type of computer and monitor.

If you have a Windows PC:

1.From the Windows Start menu, select Settings/Control Panel and double-click the Display icon.

2.Click the Settings tab.

3.Drag the resolution slider.

4.Click the Advanced button and select the Monitor tab.

5.Select the Refresh rate from the drop-down menu.

Refer to the chart on page 36 for Windows computers for the correct refresh rate for the resolution you selected.

6.Click OK, then click OK on the Display Properties dialog box.

If you have an Apple Macintosh:

1.From the Apple menu, select Control Panels/Monitors & Sound.

2.Click the Monitor icon.

3.Select the resolution and refresh rate from the resolution menu.

Refer to the chart page 37 for Apple Macintosh computers for the compatible resolutions for you type of Apple computer.

4.Click the Close box.

Xerox DP1015 User’s Guide

35

Image 40

Contents Projector Projector Page Table of Contents Xerox DP1015 User’s Guide Welcome Precautions Do’s and Don’ts Don’tXerox DP1015 Projector What’s in the BoxXerox DP1015 Features and Controls Video Adapter Connection Ports Removing and Replacing the Video Adapter Connecting the Projector Connecting the Projector for a Data-Only DisplayConnecting the Projector for a Video and Audio Display Connect to a Computer Connecting ComponentsConnect to an S-Video DVD Player or VCR Connect to a Composite Video DVD Player or VCR Connect to a Digital TunerPowering On/Off the Projector To turn on the projector powerLED Indicator To turn off the projector powerTo raise the projector Adjusting the Projected ImageTo lower the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizeUser Controls Panel Control and Remote ControlPanel Control Remote Control ButtonDescriptionPg.Up Using the Remote Control as a Mouse On-Screen Display OSD Menus Displaying Menus and Selecting ItemsAdjust the Projector Image Image Menu Video ModeImage Menu VGA Mode Adjust the Computer Display Image Display Menu Video ModeDisplay Menu VGA Mode Adjust the Audio Choose a LanguageProjector Management ProjectionChanging the Lamp MaintenanceTo change the lamp module Lamp Module Cleaning the Lens Cleaning the ProjectorCleaning the Projector Troubleshooting Problem No image appears on the screenFor Windows Problem Image has vertical flickering stripes Problem The image is flickering or otherwise unstableProblem Image is out of focus Problem Image is reversed Problem No soundProblem Remote control does not work Problem Lamp burns out or make a popping soundXerox DP1015 Projector Specifications Input/Output ConnectorsIf you have a Windows PC Setting the Screen ResolutionIf you have an Apple Macintosh Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh ComputersMaintenance Xerox DP1015 User’s Guide Federal Communications Commission FCC for USA Appendix a NoticesProduct Recycling and Disposal for USA Xerox DP1015 User’s Guide 05-0603-000