Xerox DP 1015 manual Maintenance, Changing the Lamp, To change the lamp module

Page 32

Maintenance

Maintenance

Changing the Lamp

The projector’s lamp life is approximately 1500 hours of use. The projector automatically monitors the lamp life. After 1500 hours of use, the projector displays a message that the lamp life is over and the lamp needs to be replaced.

When you see the message, please change the lamp as soon as possible.

Warning—The lamp module is the only user-replaceable part in the projector. To prevent electric shock, do not open the projector case.

Warning—To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The high-pressure lamp module may explode if handled incorrectly, and may shatter and cause injury if dropped.

Warning—The lamp compartment is hot! Allow the projector to cool down at least thirty minutes.

To change the lamp module

1.Turn off the projector’s power.

2.Disconnect the power cord.

3.Let the projector lamp cool completely, at least thirty minutes.

4.Use a screwdriver to remove the cover screw.

5.Then, press down on the cover lock to free the cover.

Cover Lock

Xerox DP1015 User’s Guide

27

Image 32

Contents Projector Projector Page Table of Contents Xerox DP1015 User’s Guide Welcome Precautions Do’s and Don’ts Don’tXerox DP1015 Projector What’s in the BoxXerox DP1015 Features and Controls Video Adapter Connection Ports Removing and Replacing the Video Adapter Connecting the Projector Connecting the Projector for a Data-Only DisplayConnecting the Projector for a Video and Audio Display Connect to an S-Video DVD Player or VCR Connecting ComponentsConnect to a Computer Connect to a Composite Video DVD Player or VCR Connect to a Digital TunerPowering On/Off the Projector To turn on the projector powerLED Indicator To turn off the projector powerTo lower the projector Adjusting the Projected ImageTo raise the projector Adjusting the Projector Zoom/Focus Adjusting Projection Image SizePanel Control Panel Control and Remote ControlUser Controls Remote Control ButtonDescriptionPg.Up Using the Remote Control as a Mouse On-Screen Display OSD Menus Displaying Menus and Selecting ItemsAdjust the Projector Image Image Menu Video ModeImage Menu VGA Mode Adjust the Computer Display Image Display Menu Video ModeDisplay Menu VGA Mode Adjust the Audio Choose a LanguageProjector Management ProjectionTo change the lamp module MaintenanceChanging the Lamp Lamp Module Cleaning the Projector Cleaning the ProjectorCleaning the Lens Troubleshooting Problem No image appears on the screenFor Windows Problem Image is out of focus Problem The image is flickering or otherwise unstableProblem Image has vertical flickering stripes Problem Image is reversed Problem No soundProblem Remote control does not work Problem Lamp burns out or make a popping soundXerox DP1015 Projector Specifications Input/Output ConnectorsIf you have an Apple Macintosh Setting the Screen ResolutionIf you have a Windows PC Resolution Analog Compatibility Modes-Windows ComputersResolution Analog Compatibility Modes-Macintosh ComputersMaintenance Xerox DP1015 User’s Guide Product Recycling and Disposal for USA Appendix a NoticesFederal Communications Commission FCC for USA Xerox DP1015 User’s Guide 05-0603-000