Projector Management
OSD Location—Sets the screen location of the OSD menu.
Projection:
•Front-Desktop—Projects onto a screen in front of the projector. The factory default setting.
•Rear-Desktop—Projects a reversed image so you can project from behind a translucent screen.
•Front-Ceiling—Projects an image turned upside down for ceiling-mounted projection.
•Rear-Ceiling—Projects a reversed, upside-down image for ceiling-mounted projection from behind a translucent screen.
Lamp Remind—Displays the lamp’s elapsed operating time (in hours), and lets you set a warning message that is displayed when the lamp is within 30 hours of its maximum life.
Lamp Reset—Resets the timer that monitors the lamp’s elapsed operating time. Reset this option only after installing a new lamp.
Auto Adjust—Automatically adjusts the display image to its optimum settings for the type of display source.
Reset All—Resets the projector to its original factory settings.
Source Type—Switches among the available video sources. Select the type of video source connected to your projector. Select Auto Scan to have the projector automatically scan the connected video sources and select the type that is connected.
NOTE: The RGB and Digital RGB Source Type options are for use when connecting a computer to the projector. RGB is for older computers, Digital RGB is for newer computers with a DVI or Digital RGB capability. When using Digital RGB as the Source Type, be sure to remove the video adapter from the projector.
