Xerox P8EX manual 1 Solving Printer Problems continued, Possible Cause, Remedy, Troubleshooting

		Printer Problems
Table 6.1 Solving Printer Problems (continued)
Problem	Possible Cause	Remedy
Printing is too slow.	If using Windows 3.x, Print Manager	From the Control Panel Printers menu,
	may be disabled.	check the Use Print Manager box.
	If using Windows 3.x, the	Go to the Print Manager, select
	Background Printing setting in the	Background Printing from the Options
	Options menu of Print Manager	menu, and change the setting to “High.”
	may be set to “Low.”
	If using Windows 95, the Spooling	From the Start menu, select Settings
	Setting may be set incorrectly.	and Printers. Click the DocuPrint P8ex
		icon with the right mouse button, select
		Properties, click the Details tab, and
		then click the Spool Settings button.
		Select the desired spool setting from the
		available choices.
	The computer may have insufficient	Install more memory in your computer.
	memory.
ERROR light is blinking.	Printer memory is insufficient for	Install more memory into the printer.
	print job.	Reduce resolution to 300 dpi.
All lights are blinking.	Printer failure.	Turn off power, wait for one minute, turn
		on power.
		If problem persists, contact your Xerox
		representative or dealer.
		Table 6.1 Page 4 of 4

Chapter 6: Troubleshooting 6-5

￿