Xerox 701P91273 manual Run XPrint installation script

7XPrint PostScript Print Tool Installation (Floppy Disk)

Overview:

Xprint is supported currently in the Sun Solaris 1.X / 2.X operating systems.

The XPrint PostScript Print Tool is both aprint driver and a spooling daemon. The XPrint PostScript Print Tool and print daemon work in conjunction with your Solaris 1.X and 2.X printing and spooling mechanisms.

A floppy disk installation is advisable for a small number of installations at a site (1-5) or for standalone workstations without a network connection. For greater number of installations or simplicity reasons, use the network installation option of XPrint described in Chapter 8.

Setup:

NOTE: Read the Installation Overview for your type of UNIX and select how your XPrint printer will be connected before you perform the following procedures.

NOTE: You must be able to “ping” the XPrint printer, using its hostname before proceeding.

NOTE: You will need the printer’s hostname before performing the following procedures.

NOTE: You must be root to perform the following procedures.

1.Insert XPrint PostScript Print Tool installation diskette #1 in your system’s floppy drive.

2.Run XPrint installation script:

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 7-1